DeepSeek V4.1 Flash
97b361dedd
一、采样间隔/频率显示不一致（用户报告 1ms vs 1000us、100us 0ns） * FormatDurationCompound 改为「先量化到整数皮秒、再整数分解」， 彻底消除同一数值因浮点噪声落到不同单位/留下零尾数的问题； 秒级分支与亚秒分支共用 totalPs 方案，次级进位/单位升级集中在一处。 * FormatFrequency 的单位选择改为按「舍入后的显示值」判定（999.9999999Hz 与 1000Hz 均为 1.000kHz），并做向下校正避免 0.001kHz。 二、选区截取面板 * 提示文本改为用户指定原文「启用双光标模式以进行选区截取」。 * EdgePanelWidth 计入该提示的实际文本宽度；绘制改用 UiTextClipped 不再省略。 * viewHeight 补回漏减的 bottomPad，修掉条目区与按钮之间的空白。 三、未展开的信号条目栏悬停不再变成手型光标。 四、开启「显示布局边界」后 GX 标签可正常拖拽排序 * 抽出 PaintLaneReorderOverlay（吸附槽位 + 被拖轮廓），贴图与整幅重绘共用。 * 整幅重绘在 LANE_REORDER 时按 LaneDragOffset 逐格平移重画（被拖网格最后画）， 修掉调试模式下不跟随鼠标、无吸附提示、只能盲拖的问题。 五、信号右键新增「移动到…」二级菜单（位于「仅显示该信号」之上） * 条目为「分组 N（组名）」，当前组打勾；无标题行；底部「新建分组」。 * MenuItem::submenuMaxRows + PopupMenu 独立子菜单滚动（滚动条、滚轮、视口命中过滤）， IsScrollable 计入子菜单可滚状态。 * 数据层 DataSet::MoveSignalToGroup/MoveSignal 让时间轴随信号搬运 （独占则移动、共享则复制）；TabConfig::RemapAfterSignalMove 改写引用而非先删后插。 * Application::MoveSignalCore 统一入口，保证派生计算暂停、引用修正、选中迁移与同步一致。 六、信号列表支持按住拖拽排序（组内重排 / 跨组移动） * 4px 阈值进入拖拽；条目脱离原位跟随鼠标（阴影 + 强调色描边 + 插入指示线）。 * 其它信号行/分组行按插入位置做避让位移动画（RowRect 统一叠加插值位移， 宿主 kScrollTimerId 驱动 AdvanceSignalDragAnimation）。 * 数据层 DataSet::MoveSignal 支持任意位置；TabConfig::RemapAfterSignalReorder 线性重映射。 * 拖拽中禁用组名悬浮；双击改名与 InvalidateRows 均正确终止拖拽态。 验证：删 .o 全量重编译零 error / 零 warning；产物 873,984 B（< 1MB 预警阈值）。 本轮未使用鼠标/键盘/屏幕，未运行任何 GUI 探针，仅编译验证 + 源码级核对。
1070 lines
44 KiB
C++
1070 lines
44 KiB
C++
// SignalPanel 实现分片 —— 绘制：列表行（含行位图缓存）、样式区、筛选框、滚动条。
|
||
//
|
||
// 共用的常量与工具函数在 SignalPanelInternal.hpp（命名空间 `spdetail`，全部 inline）。
|
||
// 六个分片按**职责**划分：
|
||
// SignalPanel.cpp 核心：状态、行集合、布局与几何、可见性
|
||
// SignalPanelPaint.cpp 绘制：列表行（含行位图缓存）、样式区、筛选框、滚动条（**本文件**）
|
||
// SignalPanelInteraction.cpp 交互：命中测试、鼠标/键盘派发、光标形状
|
||
// SignalPanelEdit.cpp 内联编辑：筛选框、组名/信号名、数值输入、颜色与透明度
|
||
// SignalPanelScroll.cpp 动画与滚动：分组折起、联动滚动、"滚动到目标信号"
|
||
// SignalPanelMenu.cpp 弹出菜单：系数/偏移、镜像、右键菜单与命令回执
|
||
#include "SignalPanelInternal.hpp"
|
||
|
||
#include <cstring>
|
||
|
||
namespace jdi
|
||
{
|
||
|
||
namespace
|
||
{
|
||
/**
|
||
* @brief 行位图渲染时使用的**临时**文本几何收集器（调试用）。
|
||
*
|
||
* 行的内容先画进位图再贴回屏幕，因此这里收到的是**位图坐标**；
|
||
* `PaintRowCached` 会把它们连同位图一起缓存，并在贴图时按原点偏移回放给外层收集器。
|
||
* ⚠️ 不缓存的话，"命中缓存的帧根本不调用 `UiText`"，文本框会在第二帧全部消失。
|
||
*/
|
||
class RowTextCollector : public UiTextRectSink
|
||
{
|
||
public:
|
||
void OnTextRect(const gd::RectF& rect) override { rects.push_back(rect); }
|
||
std::vector<gd::RectF> rects; /**< 位图坐标下的文本墨迹矩形。 */
|
||
};
|
||
} // namespace
|
||
|
||
void SignalPanel::PaintStickyGroupRow(gd::Graphics& g, int row)
|
||
{
|
||
if (row < 0 || row >= static_cast<int>(m_rows.size()) ||
|
||
m_rows[static_cast<std::size_t>(row)].kind != RowKind::GROUP)
|
||
{
|
||
return;
|
||
}
|
||
|
||
const int rowCount = static_cast<int>(m_rows.size());
|
||
const float height = m_rows[static_cast<std::size_t>(row)].height;
|
||
const float naturalY = RowRect(row).Y;
|
||
const float stickyY = StickyGroupRowTop(row, rowCount);
|
||
if (stickyY + height <= m_listRect.Y + 0.5f)
|
||
{
|
||
return; // 已经整块滑出列表上边界
|
||
}
|
||
|
||
m_rowYOverrideActive = true;
|
||
m_rowYOverrideY = stickyY;
|
||
// 悬浮行必须是不透明的，否则下面的信号行会与组名叠在一起看不清；
|
||
// `FillRowRect` 会把矩形夹到列表矩形（GDI 填充不受 GDI+ 裁剪约束）。
|
||
SetRowClip(gd::RectF(m_listRect.X, stickyY, m_listRect.Width, height));
|
||
FillRowRect(g, gd::RectF(m_listRect.X, stickyY, m_listRect.Width, height), m_theme->panelBg);
|
||
PaintGroupRow(g, row);
|
||
ClearRowClip();
|
||
// 只有真正“浮”在其它行之上时才补一条底部边界线（否则会与正常绘制有差异）。
|
||
if (stickyY > naturalY + 0.5f)
|
||
{
|
||
UiDrawLine(g, m_listRect.X, stickyY + height - 0.5f, m_listRect.X + m_listRect.Width,
|
||
stickyY + height - 0.5f, m_theme->border, 1.0f);
|
||
}
|
||
m_rowYOverrideActive = false;
|
||
}
|
||
|
||
void SignalPanel::Paint(gd::Graphics& g)
|
||
{
|
||
if (m_theme == nullptr || m_fonts == nullptr)
|
||
{
|
||
return;
|
||
}
|
||
|
||
EnsureRows();
|
||
UiFillRect(g, m_area, m_theme->panelBg);
|
||
|
||
// 标题区。
|
||
{
|
||
std::wstring title = L"信号";
|
||
if (m_dataSet != nullptr && m_tab != nullptr)
|
||
{
|
||
title += L" · " + std::to_wstring(m_tab->VisibleCount()) + L"/" +
|
||
std::to_wstring(TotalSignalCount()) + L" 已选";
|
||
}
|
||
|
||
gd::RectF titleRect(m_headerRect.X + kPadding * m_scale, m_headerRect.Y,
|
||
std::max(20.0f, m_headerRect.Width - kPadding * 2.0f * m_scale -
|
||
m_toggleAllRect.Width - 8.0f * m_scale),
|
||
m_headerRect.Height);
|
||
UiText(g, UiEllipsize(title, m_fonts->uiBold, titleRect.Width), m_fonts->uiBold, titleRect,
|
||
m_theme->textStrong, TextAlign::LEFT);
|
||
|
||
const bool allVisible = AreAllSignalsVisible();
|
||
const std::wstring toggleLabel = allVisible ? L"全部隐藏" : L"全部显示";
|
||
const bool toggleHover = (m_hoverStyle == StyleHit::TOGGLE_ALL);
|
||
if (toggleHover)
|
||
{
|
||
UiFillRoundRect(g, m_toggleAllRect, kCorner * m_scale, m_theme->hover);
|
||
}
|
||
UiDrawRoundRect(g, m_toggleAllRect, kCorner * m_scale, m_theme->border, 1.0f);
|
||
const bool enabled = (m_dataSet != nullptr && !m_dataSet->Empty());
|
||
UiText(g, toggleLabel, m_fonts->uiSmall, m_toggleAllRect,
|
||
enabled ? m_theme->text : m_theme->textMuted, TextAlign::CENTER);
|
||
}
|
||
|
||
// 「筛选信号」输入框：未输入内容时显示占位提示，单击进入编辑，输入实时过滤下方列表。
|
||
{
|
||
UiFillRoundRect(g, m_filterRect, kCorner * m_scale, m_theme->cardBg);
|
||
UiDrawRoundRect(g, m_filterRect, kCorner * m_scale,
|
||
m_filterEditing ? m_theme->accent : m_theme->border,
|
||
m_filterEditing ? 1.6f : 1.0f);
|
||
|
||
const float pad = kFilterTextPad * m_scale;
|
||
const gd::RectF clearRect = FilterClearRect();
|
||
// 有输入内容时在右侧留出 ✕ 的位置，文本不会压到按钮上。
|
||
const float textRight = (clearRect.Width > 0.0f) ? clearRect.X : (m_filterRect.X + m_filterRect.Width);
|
||
const float textWidth = std::max(8.0f, textRight - pad - (m_filterRect.X + pad));
|
||
const gd::RectF textRect(m_filterRect.X + pad, m_filterRect.Y, textWidth,
|
||
m_filterRect.Height);
|
||
|
||
if (m_filterEditing)
|
||
{
|
||
// 外框（m_filterRect）已经画好了底板与强调色边框，这里只叠加文本内容。
|
||
// 若改用 UiDrawEditField，会在外框内部再套一个带边框的圆角框，
|
||
// 空内容时只剩一圈内框十分突兀（用户明确要求去掉这层"内圈"）。
|
||
gd::RectF fieldRect = FilterFieldRect();
|
||
fieldRect.Width = std::max(8.0f, textWidth + pad);
|
||
UiDrawEditFieldContent(g, fieldRect, m_filterEdit, m_fonts->uiSmall, m_scale);
|
||
}
|
||
else if (m_filterText.empty())
|
||
{
|
||
UiText(g, L"筛选信号", m_fonts->uiSmall, textRect, m_theme->textMuted, TextAlign::LEFT);
|
||
}
|
||
else
|
||
{
|
||
UiText(g, UiEllipsize(m_filterText, m_fonts->uiSmall, textWidth), m_fonts->uiSmall,
|
||
textRect, m_theme->text, TextAlign::LEFT);
|
||
}
|
||
|
||
// 清空按钮 ✕：仅在筛选框有内容时出现，悬停高亮（鼠标光标保持箭头）。
|
||
if (clearRect.Width > 0.0f)
|
||
{
|
||
const bool clearHot = (m_hoverStyle == StyleHit::FILTER_CLEAR);
|
||
if (clearHot)
|
||
{
|
||
UiFillRoundRect(g, clearRect, 3.0f * m_scale, WithAlpha(m_theme->danger, 0x33));
|
||
}
|
||
const std::uint32_t crossColor = clearHot ? m_theme->danger : m_theme->textMuted;
|
||
const float crossPad = clearRect.Width * 0.28f;
|
||
UiDrawLine(g, clearRect.X + crossPad, clearRect.Y + crossPad,
|
||
clearRect.X + clearRect.Width - crossPad,
|
||
clearRect.Y + clearRect.Height - crossPad, crossColor, 1.5f * m_scale);
|
||
UiDrawLine(g, clearRect.X + clearRect.Width - crossPad, clearRect.Y + crossPad,
|
||
clearRect.X + crossPad, clearRect.Y + clearRect.Height - crossPad, crossColor,
|
||
1.5f * m_scale);
|
||
}
|
||
}
|
||
|
||
// 列表区。
|
||
{
|
||
const int saveState = g.Save();
|
||
g.SetClip(gd::RectF(m_listRect.X, m_listRect.Y, m_listRect.Width, m_listRect.Height));
|
||
|
||
if (m_dataSet == nullptr || m_dataSet->Empty())
|
||
{
|
||
UiText(g, L"尚未加载数据，请打开数据文件", m_fonts->uiSmall, m_listRect, m_theme->textMuted,
|
||
TextAlign::CENTER);
|
||
}
|
||
else if (m_rows.empty() && !m_filterText.empty())
|
||
{
|
||
// 筛选结果为空：明确提示"无匹配"，而不是让人误以为数据丢失。
|
||
UiText(g, L"无匹配的筛选信号", m_fonts->uiSmall, m_listRect, m_theme->textMuted,
|
||
TextAlign::CENTER);
|
||
}
|
||
else
|
||
{
|
||
const int rowCount = static_cast<int>(m_rows.size());
|
||
// 先定出要「悬浮」的分组行（若有）：常规循环跳过它，最后统一钉在列表顶部绘制，
|
||
// 否则它会先被画一次在滚动位置上、又被画一次在顶部（视觉上重叠两份）。
|
||
// ⚠️ 拖拽排序期间**不钉**：被拖条目会随鼠标上下移动，钉住组名会让"让位"
|
||
// 的观感错乱（用户 2026-11-03 要求拖拽时其它条目做避让动画）。
|
||
const int stickyRow = m_signalDragging ? -1 : StickyGroupRowIndex(rowCount);
|
||
for (int row = 0; row < rowCount; ++row)
|
||
{
|
||
if (row == stickyRow)
|
||
{
|
||
continue;
|
||
}
|
||
// 被拖拽的条目不再画在原位置：它由 `PaintSignalDragGhost` 画在鼠标处。
|
||
if (m_signalDragging && row == m_signalDragRow)
|
||
{
|
||
continue;
|
||
}
|
||
const gd::RectF rect = RowRect(row);
|
||
if (rect.Y + rect.Height < m_listRect.Y || rect.Y > m_listRect.Y + m_listRect.Height)
|
||
{
|
||
continue;
|
||
}
|
||
|
||
// 折起/展开动画：信号行整组向上平移，越过组名下边界的部分要“消失（藏进组名栏）”。
|
||
// 已经完全越过的行整行跳过（省一次绘制），部分越过的行把裁剪上边界抬到组名下边界；
|
||
// ⚠️ 此时还必须把 **GDI+ 裁剪**也收紧到同一条线 —— 行内的色块 / 复选框 / 网格徽标
|
||
// 走的是 GDI+ 绘制（只受 `SetClip` 约束），不收紧就会画到组名栏上面去。
|
||
const int rowSave = g.Save();
|
||
SetRowClip(rect);
|
||
const float hideTop = AnimationHideTopForRow(row, stickyRow);
|
||
if (hideTop > rect.Y + 0.5f)
|
||
{
|
||
if (rect.Y + rect.Height <= hideTop + 0.5f)
|
||
{
|
||
g.Restore(rowSave);
|
||
ClearRowClip();
|
||
continue;
|
||
}
|
||
ClampRowClipTop(hideTop);
|
||
g.SetClip(m_rowClipRect, gd::CombineModeIntersect);
|
||
}
|
||
|
||
// ⚠️ 整行走**位图缓存**：分组折起/展开动画只是在平移行，
|
||
// 行的像素一个也没变；逐行重画十来个 GDI+ 原语要 0.35ms/行
|
||
//（一屏 35~40 行 ⇒ 每帧 12~15ms），这是"只有文字的列表却滚动卡顿"的真因。
|
||
PaintRowCached(g, row);
|
||
g.Restore(rowSave);
|
||
ClearRowClip();
|
||
}
|
||
|
||
PaintStickyGroupRow(g, stickyRow);
|
||
// 被拖拽的信号条目：跟随鼠标、脱离列表本体绘制（并在落点画插入指示线）。
|
||
PaintSignalDragGhost(g);
|
||
}
|
||
|
||
g.Restore(saveState);
|
||
}
|
||
|
||
PaintScrollBar(g);
|
||
PaintStyleSection(g);
|
||
|
||
// 分隔线。
|
||
UiDrawLine(g, m_area.X + m_area.Width - 1.0f, m_area.Y, m_area.X + m_area.Width - 1.0f,
|
||
m_area.Y + m_area.Height, m_theme->border, 1.0f);
|
||
UiDrawLine(g, m_headerRect.X, m_headerRect.Y + m_headerRect.Height - 1.0f,
|
||
m_headerRect.X + m_headerRect.Width, m_headerRect.Y + m_headerRect.Height - 1.0f,
|
||
m_theme->border, 1.0f);
|
||
if (m_styleRect.Height > 0.0f)
|
||
{
|
||
UiDrawLine(g, m_styleRect.X, m_styleRect.Y, m_styleRect.X + m_styleRect.Width, m_styleRect.Y,
|
||
m_theme->border, 1.0f);
|
||
}
|
||
}
|
||
|
||
void SignalPanel::PaintRowText(gd::Graphics& g, const std::wstring& text, HFONT font,
|
||
const gd::RectF& rect, std::uint32_t argb, TextAlign align)
|
||
{
|
||
// 行内文本必须显式裁剪：GDI 文本不遵循 GDI+ 的 `SetClip`，
|
||
// 否则列表滚动时顶部那些“部分可见”的行会把组名/信号名画到筛选框上。
|
||
// 另外，分组折起动画是**刚性平移**（行高不变，信号行整体上移并被组名栏裁掉）——
|
||
// 此时同样必须裁到**本行矩形**内，否则垂直居中的文字会溢出到相邻行上。
|
||
//
|
||
// ⚠️ **行位图缓存渲染时反而不能裁剪**（`m_rowClipRender`）：位图是整行内容，
|
||
// 裁剪留到贴图时由 GDI+ 裁剪区完成（否则部分滚出上边界的行会永久丢掉顶部像素）。
|
||
if (m_rowClipRender)
|
||
{
|
||
UiText(g, text, font, rect, argb, align);
|
||
return;
|
||
}
|
||
UiTextClipped(g, text, font, rect, argb, align, m_rowClipActive ? m_rowClipRect : m_listRect);
|
||
}
|
||
|
||
void SignalPanel::FillRowRect(gd::Graphics& g, const gd::RectF& rect, std::uint32_t argb)
|
||
{
|
||
// 夹取而不是裁剪：纯色填充下两者等价，而夹取对 `UiFillRect` 的 GDI 快路径同样有效
|
||
//（大面积不透明矩形会改走 GDI `FillRect`，它同样不受 GDI+ 裁剪约束）。
|
||
gd::RectF clipped = rect;
|
||
if (!m_rowClipRender)
|
||
{
|
||
clipped.Intersect(m_rowClipActive ? m_rowClipRect : m_listRect);
|
||
if (clipped.Width <= 0.0f || clipped.Height <= 0.0f)
|
||
{
|
||
return;
|
||
}
|
||
}
|
||
UiFillRect(g, clipped, argb);
|
||
}
|
||
|
||
void SignalPanel::InvalidateRowCache()
|
||
{
|
||
for (RowBitmapCache& cache : m_rowBitmapCache)
|
||
{
|
||
if (cache.dc != nullptr)
|
||
{
|
||
DeleteDC(cache.dc);
|
||
cache.dc = nullptr;
|
||
}
|
||
if (cache.dib != nullptr)
|
||
{
|
||
DeleteObject(cache.dib);
|
||
cache.dib = nullptr;
|
||
}
|
||
}
|
||
m_rowBitmapCache.clear();
|
||
m_rowBitmapLiveCount = 0;
|
||
}
|
||
|
||
std::uint64_t SignalPanel::RowCacheKey(int row) const
|
||
{
|
||
std::uint64_t hash = 1469598103934665603ull;
|
||
const auto mix = [&hash](std::uint64_t value)
|
||
{
|
||
hash ^= value;
|
||
hash *= 1099511628211ull;
|
||
};
|
||
const auto mixFloat = [&mix](float value)
|
||
{
|
||
std::uint32_t bits = 0;
|
||
std::memcpy(&bits, &value, sizeof(bits));
|
||
mix(bits);
|
||
};
|
||
const auto mixText = [&mix](const std::wstring& text)
|
||
{
|
||
mix(text.size());
|
||
for (const wchar_t character : text)
|
||
{
|
||
mix(static_cast<std::uint64_t>(character));
|
||
}
|
||
};
|
||
|
||
if (row < 0 || row >= static_cast<int>(m_rows.size()))
|
||
{
|
||
return hash;
|
||
}
|
||
const ListRow& item = m_rows[static_cast<std::size_t>(row)];
|
||
mix(static_cast<std::uint64_t>(item.kind));
|
||
mix(static_cast<std::uint64_t>(item.groupIndex + 1));
|
||
mix(static_cast<std::uint64_t>(item.signalIndex + 1));
|
||
mixFloat(item.height);
|
||
mixFloat(m_scale);
|
||
mix(static_cast<std::uint64_t>(reinterpret_cast<std::uintptr_t>(m_theme)));
|
||
mix(static_cast<std::uint64_t>(reinterpret_cast<std::uintptr_t>(m_fonts)));
|
||
mix(static_cast<std::uint64_t>((m_hoverRow == row) ? (static_cast<int>(m_hoverPart) + 1) : 0));
|
||
|
||
if (item.kind == RowKind::GROUP)
|
||
{
|
||
const SignalGroup* group =
|
||
(m_dataSet != nullptr) ? m_dataSet->GroupAt(item.groupIndex) : nullptr;
|
||
mixText((group != nullptr) ? group->name : std::wstring());
|
||
mixText(GroupStatsText(row));
|
||
mix(IsGroupCollapsed(item.groupIndex) ? 1ull : 0ull);
|
||
mix(static_cast<std::uint64_t>(item.displayCount + 1));
|
||
if (m_tab != nullptr)
|
||
{
|
||
// ⚠️ 必须与绘制侧同源：筛选状态下复选框反映的是**筛选子集**的三态，
|
||
// 若仍用整组的 `GroupAllVisible` 入键，勾选筛选结果后缓存键不变
|
||
// ⇒ 复选框不会重画（用户 2026-11-03 报告的问题之一）。
|
||
std::vector<bool> filterMask;
|
||
if (BuildFilterMask(item.groupIndex, filterMask))
|
||
{
|
||
mix(m_tab->GroupAllVisibleSubset(item.groupIndex, filterMask) ? 1ull : 0ull);
|
||
mix(m_tab->GroupHasVisibleSubset(item.groupIndex, filterMask) ? 2ull : 0ull);
|
||
}
|
||
else
|
||
{
|
||
mix(m_tab->GroupAllVisible(item.groupIndex) ? 1ull : 0ull);
|
||
mix(m_tab->GroupHasVisible(item.groupIndex) ? 2ull : 0ull);
|
||
}
|
||
}
|
||
const bool editing = (m_editField == StyleEditField::GROUP_TITLE && m_editRow == row);
|
||
mix(editing ? 1ull : 0ull);
|
||
if (editing)
|
||
{
|
||
mixText(m_edit.Text());
|
||
// ⚠️ 插入符与选区必须进键：行位图缓存只按“行的可见内容”生效，
|
||
// 而编辑态下插入符位置 / 选区范围也是可见内容。漏掉它们时，
|
||
// 方向键与鼠标框选虽然改变了 `TextEdit` 状态，但键不变 ⇒ 贴回的仍是旧位图，
|
||
// 屏幕上看就是“无法部分选择、光标不动”（用户 2026-10-19 报告）。
|
||
mix(static_cast<std::uint64_t>(m_edit.Caret()) + 1ull);
|
||
mix(static_cast<std::uint64_t>(m_edit.SelectionBegin()) + 1ull);
|
||
mix(static_cast<std::uint64_t>(m_edit.SelectionEnd()) + 1ull);
|
||
}
|
||
return hash;
|
||
}
|
||
|
||
const SignalRef ref{item.groupIndex, item.signalIndex};
|
||
const SignalData* signal = (m_dataSet != nullptr) ? m_dataSet->Resolve(ref) : nullptr;
|
||
const SignalStyle* style = StyleOf(ref);
|
||
mixText((signal != nullptr) ? signal->name : std::wstring());
|
||
mix((SelectedRef() == ref) ? 1ull : 0ull);
|
||
if (style != nullptr)
|
||
{
|
||
mix(static_cast<std::uint64_t>(style->color));
|
||
mixFloat(style->opacity);
|
||
}
|
||
if (m_tab != nullptr)
|
||
{
|
||
mix(m_tab->IsVisible(ref) ? 1ull : 0ull);
|
||
mix(static_cast<std::uint64_t>(m_tab->LaneOfSignal(ref) + 1));
|
||
}
|
||
const bool editing = (m_editField == StyleEditField::SIGNAL_NAME && m_editRow == row);
|
||
mix(editing ? 1ull : 0ull);
|
||
if (editing)
|
||
{
|
||
mixText(m_edit.Text());
|
||
// 同分组行：插入符 / 选区也是行的可见内容（见 `GROUP_TITLE` 分支的注释）。
|
||
mix(static_cast<std::uint64_t>(m_edit.Caret()) + 1ull);
|
||
mix(static_cast<std::uint64_t>(m_edit.SelectionBegin()) + 1ull);
|
||
mix(static_cast<std::uint64_t>(m_edit.SelectionEnd()) + 1ull);
|
||
}
|
||
return hash;
|
||
}
|
||
|
||
void SignalPanel::PaintRowCached(gd::Graphics& g, int row)
|
||
{
|
||
if (m_dataSet == nullptr || m_tab == nullptr || m_theme == nullptr || row < 0 ||
|
||
row >= static_cast<int>(m_rows.size()))
|
||
{
|
||
return;
|
||
}
|
||
const gd::RectF rect = RowRect(row);
|
||
if (rect.Height <= 0.5f)
|
||
{
|
||
return;
|
||
}
|
||
const int originX = static_cast<int>(std::floor(m_listRect.X));
|
||
const int originY = static_cast<int>(std::floor(rect.Y));
|
||
const int width = static_cast<int>(std::ceil(m_listRect.Width));
|
||
const int height = static_cast<int>(std::ceil(rect.Height));
|
||
if (width <= 0 || height <= 0)
|
||
{
|
||
return;
|
||
}
|
||
// ⚠️ 上限检查必须在**取引用之前**：`InvalidateRowCache()` 会清空容器，
|
||
// 清理后原有引用（`RowBitmapCache&`）就悬空了。
|
||
if (m_rowBitmapLiveCount >= kRowBitmapCacheLimit)
|
||
{
|
||
InvalidateRowCache();
|
||
}
|
||
if (m_rowBitmapCache.size() < m_rows.size())
|
||
{
|
||
m_rowBitmapCache.resize(m_rows.size());
|
||
}
|
||
RowBitmapCache& cache = m_rowBitmapCache[static_cast<std::size_t>(row)];
|
||
const std::uint64_t key = RowCacheKey(row);
|
||
const bool sameSize = (cache.dc != nullptr) && cache.width == width && cache.height == height;
|
||
if (!sameSize || cache.key != key)
|
||
{
|
||
if (!sameSize)
|
||
{
|
||
if (cache.dc != nullptr)
|
||
{
|
||
DeleteDC(cache.dc);
|
||
cache.dc = nullptr;
|
||
if (m_rowBitmapLiveCount > 0)
|
||
{
|
||
--m_rowBitmapLiveCount;
|
||
}
|
||
}
|
||
if (cache.dib != nullptr)
|
||
{
|
||
DeleteObject(cache.dib);
|
||
cache.dib = nullptr;
|
||
}
|
||
// ⚠️ DIB + 内存 DC（而不是 `gd::Bitmap`）：GDI 在 GDI+ 位图的临时 HDC 上
|
||
// 会关闭 ClearType，导致列表文字丢失亚像素渲染、与正文观感不一致。
|
||
BITMAPINFO info = {};
|
||
info.bmiHeader.biSize = sizeof(BITMAPINFOHEADER);
|
||
info.bmiHeader.biWidth = width;
|
||
info.bmiHeader.biHeight = -height; // 自上而下
|
||
info.bmiHeader.biPlanes = 1;
|
||
info.bmiHeader.biBitCount = 32;
|
||
info.bmiHeader.biCompression = BI_RGB;
|
||
void* bits = nullptr;
|
||
HDC memoryDc = CreateCompatibleDC(nullptr);
|
||
HBITMAP dib = (memoryDc != nullptr)
|
||
? CreateDIBSection(memoryDc, &info, DIB_RGB_COLORS, &bits, nullptr, 0)
|
||
: nullptr;
|
||
if (memoryDc == nullptr || dib == nullptr)
|
||
{
|
||
if (dib != nullptr)
|
||
{
|
||
DeleteObject(dib);
|
||
}
|
||
if (memoryDc != nullptr)
|
||
{
|
||
DeleteDC(memoryDc);
|
||
}
|
||
return;
|
||
}
|
||
SelectObject(memoryDc, dib);
|
||
cache.dc = memoryDc;
|
||
cache.dib = dib;
|
||
cache.width = width;
|
||
cache.height = height;
|
||
++m_rowBitmapLiveCount;
|
||
}
|
||
{
|
||
gd::Graphics rowGraphics(cache.dc);
|
||
rowGraphics.SetSmoothingMode(gd::SmoothingModeAntiAlias);
|
||
rowGraphics.SetPixelOffsetMode(gd::PixelOffsetModeHalf);
|
||
rowGraphics.SetTextRenderingHint(gd::TextRenderingHintClearTypeGridFit);
|
||
rowGraphics.Clear(ToGdiColor(m_theme->panelBg));
|
||
// ⚠️ 用**几何平移**而不是 `TranslateTransform`（见 `m_rowRenderActive`）。
|
||
m_rowRenderActive = true;
|
||
m_rowRenderOriginX = static_cast<float>(originX);
|
||
m_rowRenderOriginY = static_cast<float>(originY);
|
||
// 调试：把文本收集器临时指向一个**位图坐标**的本地容器（偏移 0），
|
||
// 渲染完成后连同矩形一起存进缓存，命中缓存时再按原点偏移回放。
|
||
// ⚠️ **无条件收集**（不管外层是否有收集器）：行位图可能在任何一帧被渲染
|
||
//（例如用户在关闭调试时滚动过列表），若只在"外层有收集器"时才收集，
|
||
// 之后打开调试会命中缓存而永远拿不到文本框。收集成本只发生在**缓存未命中**的行上。
|
||
UiTextRectSink* const outerSink = UiGetTextRectSink();
|
||
RowTextCollector rowTextBoxes;
|
||
UiSetTextRectSink(&rowTextBoxes);
|
||
UiSetTextRectOffset(0.0f, 0.0f);
|
||
m_rowClipRender = true;
|
||
if (m_rows[static_cast<std::size_t>(row)].kind == RowKind::GROUP)
|
||
{
|
||
PaintGroupRow(rowGraphics, row);
|
||
}
|
||
else
|
||
{
|
||
PaintSignalRow(rowGraphics, row);
|
||
}
|
||
m_rowClipRender = false;
|
||
m_rowRenderActive = false;
|
||
cache.textRects = rowTextBoxes.rects;
|
||
UiSetTextRectOffset(0.0f, 0.0f);
|
||
UiSetTextRectSink(outerSink);
|
||
}
|
||
cache.key = key;
|
||
}
|
||
// 调试：把本行的文本框回放给外层收集器（缓存命中 / 刚渲染两条路共用这一段）。
|
||
if (UiTextRectSink* const outerSink = UiGetTextRectSink())
|
||
{
|
||
for (const gd::RectF& textRect : cache.textRects)
|
||
{
|
||
outerSink->OnTextRect(gd::RectF(textRect.X + static_cast<float>(originX),
|
||
textRect.Y + static_cast<float>(originY),
|
||
textRect.Width, textRect.Height));
|
||
}
|
||
}
|
||
// ⚠️ 整块 1:1 搬运（不经过 GDI+ 采样/混合），字的亚像素边缘才能原样保留。
|
||
// ⚠️ **必须自己给 DC 设裁剪**：`Graphics::GetHDC()` 交给我们的 DC 上，(a) GDI 绘制
|
||
// 不受 GDI+ `SetClip` 的约束（这是本文件多处注释过的坑），(b) 折起/展开动画时行会
|
||
// 滑进组名栏，必须裁到 `m_rowClipRect`。因此这里显式 `IntersectClipRect` 后再 `BitBlt`。
|
||
const HDC targetDc = g.GetHDC();
|
||
if (targetDc != nullptr)
|
||
{
|
||
const int saved = SaveDC(targetDc);
|
||
if (saved != 0)
|
||
{
|
||
const gd::RectF clip = m_rowClipActive ? m_rowClipRect : m_listRect;
|
||
IntersectClipRect(targetDc, static_cast<int>(std::floor(clip.X)),
|
||
static_cast<int>(std::floor(clip.Y)),
|
||
static_cast<int>(std::ceil(clip.X + clip.Width)),
|
||
static_cast<int>(std::ceil(clip.Y + clip.Height)));
|
||
}
|
||
BitBlt(targetDc, originX, originY, width, height, cache.dc, 0, 0, SRCCOPY);
|
||
if (saved != 0)
|
||
{
|
||
RestoreDC(targetDc, saved);
|
||
}
|
||
g.ReleaseHDC(targetDc);
|
||
}
|
||
}
|
||
void SignalPanel::PaintGroupRow(gd::Graphics& g, int row)
|
||
{
|
||
if (m_dataSet == nullptr || m_tab == nullptr || row < 0 || row >= static_cast<int>(m_rows.size()))
|
||
{
|
||
return;
|
||
}
|
||
|
||
const ListRow& item = m_rows[static_cast<std::size_t>(row)];
|
||
const SignalGroup* group = m_dataSet->GroupAt(item.groupIndex);
|
||
if (group == nullptr)
|
||
{
|
||
return;
|
||
}
|
||
|
||
const gd::RectF rect = RowRect(row);
|
||
const bool hovered = (m_hoverRow == row);
|
||
if (hovered)
|
||
{
|
||
FillRowRect(g, rect, m_theme->hover);
|
||
}
|
||
FillRowRect(g, gd::RectF(rect.X, rect.Y, 2.0f * m_scale, rect.Height),
|
||
WithAlpha(m_theme->borderStrong, 0x90));
|
||
|
||
const float baseX = rect.X + kPadding * m_scale;
|
||
const float centerY = rect.Y + rect.Height * 0.5f;
|
||
const bool collapsed = IsGroupCollapsed(item.groupIndex);
|
||
|
||
// 折叠三角。
|
||
{
|
||
const float cx = baseX + kDisclosureWidth * m_scale * 0.5f;
|
||
const std::uint32_t color =
|
||
(hovered && m_hoverPart == RowPart::DISCLOSURE) ? m_theme->accent : m_theme->text;
|
||
UiDrawTriangleIcon(g, gd::RectF(cx - 6.0f * m_scale, centerY - 6.0f * m_scale, 12.0f * m_scale,
|
||
12.0f * m_scale),
|
||
color, collapsed ? IconDirection::RIGHT : IconDirection::DOWN);
|
||
}
|
||
|
||
// 分组复选框（三态：全选 / 部分 / 未选）。
|
||
const gd::RectF checkRect(baseX + kDisclosureWidth * m_scale, centerY - kCheckSize * m_scale * 0.5f,
|
||
kCheckSize * m_scale, kCheckSize * m_scale);
|
||
// ⚠️ 筛选状态下复选框**只反映组内被筛选出来的信号**（用户 2026-11-03 明确要求）：
|
||
// 「不论是否筛选，这个复选框影响的都只有当前组名下显示的元素」。
|
||
std::vector<bool> filterMask;
|
||
bool allVisible = false;
|
||
bool anyVisible = false;
|
||
if (BuildFilterMask(item.groupIndex, filterMask))
|
||
{
|
||
allVisible = m_tab->GroupAllVisibleSubset(item.groupIndex, filterMask);
|
||
anyVisible = m_tab->GroupHasVisibleSubset(item.groupIndex, filterMask);
|
||
}
|
||
else
|
||
{
|
||
allVisible = m_tab->GroupAllVisible(item.groupIndex);
|
||
anyVisible = m_tab->GroupHasVisible(item.groupIndex);
|
||
}
|
||
UiDrawCheckBox(g, checkRect, allVisible ? 1 : (anyVisible ? 2 : 0), 3.0f * m_scale);
|
||
|
||
const gd::RectF closeRect = GroupCloseRect(row);
|
||
|
||
// 分组标题：左侧为“组X”标签，右侧以绘制的竖线分隔分组名（不使用字符），再显示可重命名的名称。
|
||
const std::wstring groupLabel = GroupLabelText(item.groupIndex);
|
||
// 项数文本与 `RowNameRect`（组名编辑框）、`GroupStatsRect`（命中区）共用同一来源，
|
||
// 保证“画的”与“点的”不漂移。
|
||
const std::wstring stats = GroupStatsText(row);
|
||
const float groupWidth = GroupLabelWidth(row);
|
||
const float statsWidth = UiMeasureTextWidth(m_fonts->uiSmall, stats);
|
||
const float statsRight = GroupCloseRect(row).X - 6.0f * m_scale;
|
||
const gd::RectF statsTextRect(statsRight - statsWidth, rect.Y, statsWidth, rect.Height);
|
||
const float nameLeft = checkRect.X + checkRect.Width + 8.0f * m_scale;
|
||
const float nameAreaLeft =
|
||
nameLeft + groupWidth + kGroupSeparatorGap * 2.0f * m_scale + kGroupSeparatorWidth * m_scale;
|
||
const float nameWidth =
|
||
std::max(20.0f, statsRight - statsWidth - 6.0f * m_scale - nameAreaLeft);
|
||
|
||
// 序号以强调色突出，便于在多组之间快速定位。
|
||
PaintRowText(g, groupLabel, m_fonts->uiBold, gd::RectF(nameLeft, rect.Y, groupWidth, rect.Height),
|
||
m_theme->accent, TextAlign::LEFT);
|
||
|
||
// 竖线分隔符：以绘制方式实现，与文字基线无关，排版更稳。
|
||
FillRowRect(g, gd::RectF(nameLeft + groupWidth + kGroupSeparatorGap * m_scale,
|
||
rect.Y + 7.0f * m_scale, kGroupSeparatorWidth * m_scale,
|
||
rect.Height - 14.0f * m_scale),
|
||
WithAlpha(m_theme->borderStrong, 0xB0));
|
||
|
||
if (m_editField == StyleEditField::GROUP_TITLE && m_editRow == row)
|
||
{
|
||
UiDrawEditField(g, RowNameRect(row), m_edit, m_fonts->uiSmall, m_scale);
|
||
}
|
||
else
|
||
{
|
||
PaintRowText(g, UiEllipsize(group->name, m_fonts->uiBold, nameWidth), m_fonts->uiBold,
|
||
gd::RectF(nameAreaLeft, rect.Y, nameWidth, rect.Height), m_theme->textStrong,
|
||
TextAlign::LEFT);
|
||
}
|
||
|
||
PaintRowText(g, stats, m_fonts->uiSmall, statsTextRect, m_theme->textMuted,
|
||
TextAlign::RIGHT);
|
||
|
||
// 关闭按钮（从工作区移除该分组）。
|
||
const bool closeHot = hovered && (m_hoverPart == RowPart::CLOSE);
|
||
if (closeHot)
|
||
{
|
||
UiFillRoundRect(g, closeRect, 3.0f * m_scale, m_theme->pressed);
|
||
}
|
||
UiDrawCrossIcon(g, closeRect, closeHot ? m_theme->danger : m_theme->textMuted, 1.5f * m_scale);
|
||
}
|
||
|
||
void SignalPanel::PaintSignalRow(gd::Graphics& g, int row)
|
||
{
|
||
if (m_dataSet == nullptr || m_tab == nullptr || row < 0 || row >= static_cast<int>(m_rows.size()))
|
||
{
|
||
return;
|
||
}
|
||
|
||
const ListRow& item = m_rows[static_cast<std::size_t>(row)];
|
||
const SignalRef ref{item.groupIndex, item.signalIndex};
|
||
const SignalData* signal = m_dataSet->Resolve(ref);
|
||
const SignalStyle* style = StyleOf(ref);
|
||
if (signal == nullptr || style == nullptr)
|
||
{
|
||
return;
|
||
}
|
||
|
||
const gd::RectF rect = RowRect(row);
|
||
const bool selected = (SelectedRef() == ref);
|
||
const bool hovered = (m_hoverRow == row);
|
||
|
||
if (selected)
|
||
{
|
||
FillRowRect(g, rect, m_theme->selection);
|
||
FillRowRect(g, gd::RectF(rect.X, rect.Y, 2.0f * m_scale, rect.Height), m_theme->accent);
|
||
}
|
||
else if (hovered)
|
||
{
|
||
FillRowRect(g, rect, m_theme->hover);
|
||
}
|
||
|
||
const float baseX = rect.X + kPadding * m_scale + kIndent * m_scale;
|
||
const float centerY = rect.Y + rect.Height * 0.5f;
|
||
|
||
// 复选框。
|
||
const gd::RectF checkRect(baseX + kDisclosureWidth * m_scale, centerY - kCheckSize * m_scale * 0.5f,
|
||
kCheckSize * m_scale, kCheckSize * m_scale);
|
||
// 可见性属于当前标签页，与全局共享的显示外观分开读取。
|
||
const bool visible = m_tab->IsVisible(ref);
|
||
UiDrawCheckBox(g, checkRect, visible ? 1 : 0, 3.0f * m_scale);
|
||
|
||
// 颜色块：叠加不透明度，透明度过低时自动补描边（与样式区色块规则一致）。
|
||
const gd::RectF swatchRect(checkRect.X + checkRect.Width + 6.0f * m_scale,
|
||
centerY - kSwatchSize * m_scale * 0.5f, kSwatchSize * m_scale,
|
||
kSwatchSize * m_scale);
|
||
UiDrawSwatch(g, swatchRect, style->color, visible ? style->opacity : 0.3f, 2.5f * m_scale,
|
||
m_scale);
|
||
|
||
// 网格徽标（可点击，用于调整所属网格）。行尾 ✕ 恒在最右侧，徽标整体前移让位。
|
||
// ⚠️ 可见性判据必须与命中测试共用 `SignalBadgeVisible`（否则“可见但未分配网格”的信号
|
||
// 会在未绘制的空白处仍可点出「所属网格」菜单）。
|
||
const bool badgeVisible = SignalBadgeVisible(ref);
|
||
const gd::RectF badgeRect = SignalBadgeRect(row);
|
||
const gd::RectF removeRect = SignalRemoveRect(row);
|
||
|
||
float nameRightLimit = removeRect.X - 6.0f * m_scale;
|
||
if (badgeVisible)
|
||
{
|
||
nameRightLimit = badgeRect.X - 6.0f * m_scale;
|
||
}
|
||
|
||
// 名称：完全保留**源表列名**（含 "[n]" 序号与括号描述），双击可重命名。
|
||
const float nameLeft = swatchRect.X + swatchRect.Width + 6.0f * m_scale;
|
||
if (m_editField == StyleEditField::SIGNAL_NAME && m_editRow == row)
|
||
{
|
||
UiDrawEditField(g, RowNameRect(row), m_edit, m_fonts->ui, m_scale);
|
||
}
|
||
else
|
||
{
|
||
const float nameWidth = std::max(16.0f, nameRightLimit - nameLeft);
|
||
const std::uint32_t nameColor = visible ? m_theme->text : m_theme->textMuted;
|
||
PaintRowText(g, UiEllipsize(signal->name, m_fonts->ui, nameWidth), m_fonts->ui,
|
||
gd::RectF(nameLeft, rect.Y, nameWidth, rect.Height), nameColor, TextAlign::LEFT);
|
||
}
|
||
|
||
if (badgeVisible)
|
||
{
|
||
const bool badgeHot = hovered && (m_hoverPart == RowPart::LANE_BADGE);
|
||
UiFillRoundRect(g, badgeRect, kBadgeHeight * m_scale * 0.5f,
|
||
badgeHot ? m_theme->accentSoft : m_theme->cardBg);
|
||
UiDrawRoundRect(g, badgeRect, kBadgeHeight * m_scale * 0.5f,
|
||
badgeHot ? m_theme->accent : m_theme->border, 1.0f);
|
||
PaintRowText(g, L"G" + std::to_wstring(m_tab->LaneOfSignal(ref) + 1), m_fonts->monoSmall,
|
||
badgeRect, badgeHot ? m_theme->textStrong : m_theme->text, TextAlign::CENTER);
|
||
}
|
||
|
||
// 「移除该信号」✕：位于信号条目最右端，尺寸/样式/右边距与分组行的关闭 ✕ 完全一致。
|
||
// 最后绘制，确保它永远压在最上层（与分组行 ✕ 的绘制顺序保持一致）。
|
||
{
|
||
const bool removeHot = hovered && (m_hoverPart == RowPart::REMOVE_SIGNAL);
|
||
if (removeHot)
|
||
{
|
||
UiFillRoundRect(g, removeRect, 3.0f * m_scale, m_theme->pressed);
|
||
}
|
||
UiDrawCrossIcon(g, removeRect, removeHot ? m_theme->danger : m_theme->textMuted,
|
||
1.5f * m_scale);
|
||
}
|
||
}
|
||
|
||
void SignalPanel::PaintScrollBar(gd::Graphics& g)
|
||
{
|
||
if (!m_scrollBarVisible || m_contentHeight <= m_listRect.Height)
|
||
{
|
||
return;
|
||
}
|
||
|
||
UiFillRoundRect(g, m_scrollBarRect, kScrollBarThickness * m_scale * 0.5f, m_theme->gridWeak);
|
||
UiFillRoundRect(g, ScrollThumbRect(), kScrollBarThickness * m_scale * 0.5f, m_theme->borderStrong);
|
||
}
|
||
|
||
void SignalPanel::PaintStyleSection(gd::Graphics& g)
|
||
{
|
||
if (m_styleRect.Height <= 0.0f)
|
||
{
|
||
return;
|
||
}
|
||
|
||
UiFillRect(g, m_styleRect, m_theme->panelBg);
|
||
|
||
// ---- 顶部「目标」行（无论是否已选中信号都要绘制：未选中时显示占位文本）----
|
||
PaintTargetRow(g);
|
||
|
||
const SignalStyle* style = (m_tab == nullptr) ? nullptr : StyleOf(SelectedRef());
|
||
if (style == nullptr || SelectedRef().IsValid() == false)
|
||
{
|
||
// 提示文本只占「目标」行以下的区域，避免与目标行重叠。
|
||
const float top = m_targetRowRect.Y + m_targetRowRect.Height;
|
||
UiText(g, L"请选择信号以编辑样式", m_fonts->uiSmall,
|
||
gd::RectF(m_styleRect.X, top, m_styleRect.Width,
|
||
std::max(0.0f, m_styleRect.Y + m_styleRect.Height - top)),
|
||
m_theme->textMuted, TextAlign::CENTER);
|
||
return;
|
||
}
|
||
// 目标信号本身：线宽复位按钮需要它的有效采样点数（单点信号默认用最大线宽）。
|
||
const SignalData* signal =
|
||
(m_dataSet != nullptr) ? m_dataSet->Resolve(SelectedRef()) : nullptr;
|
||
|
||
const float labelWidth = kStyleLabelWidth * m_scale;
|
||
|
||
// 行标签统一以整行为基准垂直居中，确保与同行控件纵向对齐。
|
||
auto paintRowLabel = [&](int rowIndex, const wchar_t* text)
|
||
{
|
||
const gd::RectF& row = m_styleRowRects[static_cast<std::size_t>(rowIndex)];
|
||
UiText(g, text, m_fonts->uiSmall, gd::RectF(row.X, row.Y, labelWidth, row.Height),
|
||
m_theme->textMuted, TextAlign::LEFT);
|
||
};
|
||
|
||
// 「线宽 / 透明度」两行右侧的**复位按钮**（与「系数/偏移」二级菜单标题栏的还原图标同款）。
|
||
// `changed` = 当前值是否已偏离默认值：偏离时才用强调色（一眼看出"这里可以点"），
|
||
// 已是默认值时用弱色（仍可点，但结果不变）。
|
||
auto paintStyleReset = [&](const gd::RectF& rect, StyleHit hit, bool changed)
|
||
{
|
||
if (rect.Width <= 0.0f || rect.Height <= 0.0f)
|
||
{
|
||
return;
|
||
}
|
||
const bool hot = (m_hoverStyle == hit);
|
||
if (hot)
|
||
{
|
||
UiFillRoundRect(g, gd::RectF(rect.X - 1.0f * m_scale, rect.Y - 1.0f * m_scale,
|
||
rect.Width + 2.0f * m_scale, rect.Height + 2.0f * m_scale),
|
||
3.0f * m_scale, WithAlpha(m_theme->accent, 0x33));
|
||
}
|
||
UiPaintResetIcon(g, rect, hot ? m_theme->accent
|
||
: (changed ? m_theme->text : m_theme->textMuted),
|
||
m_scale);
|
||
};
|
||
|
||
// ---- 第一行：颜色（预设色块 + 自定义颜色入口）----
|
||
{
|
||
paintRowLabel(0, L"颜色");
|
||
|
||
int paletteCount = 0;
|
||
const std::uint32_t* palette = SignalPalette(paletteCount);
|
||
|
||
// 判定“当前是否在用自定义色”：必须同时满足
|
||
// 1) 显示颜色等于记忆的自定义色；
|
||
// 2) 该颜色不是任何一个可见的预设色。
|
||
// 否则一旦自定义色与某个预设色相同时，点击那个预设色块会把高亮错误地
|
||
// 挪到自定义色块上（用户报告的“点预设色直接跳到自定义色块”）。
|
||
bool presetMatches = false;
|
||
for (int index = 0; index < m_colorCount; ++index)
|
||
{
|
||
if (style->color == palette[index % paletteCount])
|
||
{
|
||
presetMatches = true;
|
||
break;
|
||
}
|
||
}
|
||
const bool customActive = (style->color == style->customColor) && !presetMatches;
|
||
for (int index = 0; index < m_colorCount; ++index)
|
||
{
|
||
const gd::RectF& rect = m_colorRects[static_cast<std::size_t>(index)];
|
||
const std::uint32_t color = palette[index % paletteCount];
|
||
const bool hovered = (m_hoverStyle == StyleHit::COLOR && m_hoverStyleIndex == index);
|
||
const bool active = !customActive && (style->color == color);
|
||
|
||
// 预设色块同样叠加不透明度；透明度过低时自动补描边以保证可辨识（与自定义色块一致）。
|
||
UiDrawSwatch(g, rect, color, style->opacity, kCorner * m_scale, m_scale);
|
||
if (active || hovered)
|
||
{
|
||
const gd::RectF ring(rect.X - 2.0f * m_scale, rect.Y - 2.0f * m_scale,
|
||
rect.Width + 4.0f * m_scale, rect.Height + 4.0f * m_scale);
|
||
UiDrawRoundRect(g, ring, 5.0f * m_scale,
|
||
active ? m_theme->textStrong : m_theme->borderStrong,
|
||
active ? 1.6f : 1.0f);
|
||
}
|
||
}
|
||
|
||
// 自定义颜色入口：与预设色块完全同尺寸、同外框规则的小方格，仅多一个加号图标。
|
||
// 方格始终显示记忆的自定义颜色，因此从任意预设色再次点击它都能立即回到上次的自定义色。
|
||
const bool chipHot = (m_hoverStyle == StyleHit::CUSTOM_CHIP);
|
||
const std::uint32_t chipColor =
|
||
UiDrawSwatch(g, m_customChipRect, style->customColor, style->opacity, kCorner * m_scale, m_scale);
|
||
const std::uint32_t iconColor = IsDarkColor(chipColor) ? 0xFFFDF6E3u : 0xFF073642u;
|
||
UiDrawPlusIcon(g, m_customChipRect, iconColor, 1.6f * m_scale);
|
||
|
||
// 当前正在使用自定义颜色、或鼠标悬停时，显示与预设色块一致的外框。
|
||
if (customActive || chipHot)
|
||
{
|
||
const gd::RectF& chip = m_customChipRect;
|
||
const gd::RectF ring(chip.X - 2.0f * m_scale, chip.Y - 2.0f * m_scale,
|
||
chip.Width + 4.0f * m_scale, chip.Height + 4.0f * m_scale);
|
||
UiDrawRoundRect(g, ring, 5.0f * m_scale,
|
||
customActive ? m_theme->textStrong : m_theme->borderStrong,
|
||
customActive ? 1.6f : 1.0f);
|
||
}
|
||
}
|
||
|
||
// ---- 第二行：样式（线段 / 散点 / 点线）----
|
||
// ⚠️ 单点信号固定使用「散点」：「线段」在单个数据点上完全画不出来、「点线」与
|
||
// 「放大自动点线」语义重叠，因此它们对单点信号**置灰且不可点**（用户 2026-10-16 要求）。
|
||
{
|
||
paintRowLabel(1, L"样式");
|
||
|
||
for (int index = 0; index < kModeOptionCount; ++index)
|
||
{
|
||
const gd::RectF& rect = m_modeRects[static_cast<std::size_t>(index)];
|
||
const bool enabled = ModeOptionEnabled(index);
|
||
const bool active = (style->mode == kModeOptions[index]);
|
||
const bool hovered =
|
||
enabled && (m_hoverStyle == StyleHit::MODE && m_hoverStyleIndex == index);
|
||
|
||
UiFillRoundRect(g, rect, kCorner * m_scale,
|
||
active ? m_theme->accentSoft : (hovered ? m_theme->hover : m_theme->cardBg));
|
||
UiDrawRoundRect(g, rect, kCorner * m_scale, active ? m_theme->accent : m_theme->border, 1.0f);
|
||
UiText(g, DrawModeName(kModeOptions[index]), m_fonts->uiSmall, rect,
|
||
!enabled ? m_theme->textMuted
|
||
: (active ? m_theme->textStrong : m_theme->text),
|
||
TextAlign::CENTER);
|
||
}
|
||
}
|
||
|
||
// ---- 第三行：调整（系数 / 镜像 / 绝对值，三个切换类按钮）----
|
||
// 结算顺序固定为「系数 → 绝对值 → 镜像」；「系数」「镜像」点击后展开二级面板。
|
||
{
|
||
paintRowLabel(2, L"调整");
|
||
|
||
const auto paintToggle = [&](int index, const wchar_t* label, bool checked, StyleHit target)
|
||
{
|
||
const gd::RectF& rect = m_adjustRects[static_cast<std::size_t>(index)];
|
||
const bool hot = (m_hoverStyle == target);
|
||
UiFillRoundRect(g, rect, kCorner * m_scale,
|
||
checked ? m_theme->accentSoft : (hot ? m_theme->hover : m_theme->cardBg));
|
||
UiDrawRoundRect(g, rect, kCorner * m_scale,
|
||
checked ? m_theme->accent : m_theme->border, 1.0f);
|
||
UiText(g, label, m_fonts->uiSmall, rect,
|
||
checked ? m_theme->textStrong : m_theme->text, TextAlign::CENTER);
|
||
};
|
||
// 映射/偏移：公式映射非空、系数不等于默认值 1、或任一偏移不为 0 时显示为"已启用"。
|
||
paintToggle(kAdjustGain, L"映射/偏移",
|
||
style->HasFormula() || !GainIsDefault(style->gain) || style->Offset(),
|
||
StyleHit::GAIN_ADJUST);
|
||
// 镜像：水平或垂直任一被勾选即显示为激活态。
|
||
paintToggle(kAdjustMirror, L"镜像", style->Mirrored(), StyleHit::MIRROR_ADJUST);
|
||
paintToggle(kAdjustAbsolute, L"绝对值", style->absolute, StyleHit::ABSOLUTE_TOGGLE);
|
||
}
|
||
|
||
// ---- 第四行：线宽（数值可点击输入；右侧为复位按钮）----
|
||
{
|
||
paintRowLabel(3, L"线宽");
|
||
|
||
const double ratio =
|
||
(static_cast<double>(style->lineWidth) - kWidthMin) / (kWidthMax - kWidthMin);
|
||
const bool active = m_draggingWidth || (m_hoverStyle == StyleHit::WIDTH_SLIDER);
|
||
UiDrawSlider(g, m_widthTrackRect, ratio, m_theme->accent, active, m_scale);
|
||
|
||
if (m_editField == StyleEditField::WIDTH)
|
||
{
|
||
UiDrawEditField(g, m_widthValueRect, m_edit, m_fonts->monoSmall, m_scale);
|
||
}
|
||
else
|
||
{
|
||
const std::wstring numberText = FormatNumber(style->lineWidth, 1);
|
||
const std::wstring fullText = numberText + L" px";
|
||
// 空间不足时省略单位，保证数值本身完整可读。
|
||
const std::wstring shown =
|
||
(UiMeasureTextWidth(m_fonts->monoSmall, fullText) >
|
||
m_widthValueRect.Width - 6.0f * m_scale)
|
||
? numberText
|
||
: fullText;
|
||
UiText(g, shown, m_fonts->monoSmall, m_widthValueRect, m_theme->textStrong, TextAlign::RIGHT);
|
||
}
|
||
paintStyleReset(m_widthResetRect, StyleHit::WIDTH_RESET,
|
||
style->lineWidth !=
|
||
DefaultSignalLineWidth(signal != nullptr ? signal->finiteCount : 0));
|
||
}
|
||
|
||
// ---- 第五行：透明度（数值可点击输入）----
|
||
{
|
||
paintRowLabel(4, L"透明度");
|
||
|
||
const bool active = m_draggingOpacity || (m_hoverStyle == StyleHit::OPACITY_SLIDER);
|
||
UiDrawSlider(g, m_opacityTrackRect, static_cast<double>(style->opacity), m_theme->accent, active,
|
||
m_scale);
|
||
|
||
if (m_editField == StyleEditField::OPACITY)
|
||
{
|
||
UiDrawEditField(g, m_opacityValueRect, m_edit, m_fonts->monoSmall, m_scale);
|
||
}
|
||
else
|
||
{
|
||
const int percent = static_cast<int>(style->opacity * 100.0f + 0.5f);
|
||
UiText(g, std::to_wstring(percent) + L"%", m_fonts->monoSmall, m_opacityValueRect,
|
||
m_theme->textStrong, TextAlign::RIGHT);
|
||
}
|
||
paintStyleReset(m_opacityResetRect, StyleHit::OPACITY_RESET,
|
||
std::fabs(style->opacity - 1.0f) > 0.001f);
|
||
}
|
||
}
|
||
|
||
void SignalPanel::PaintTargetRow(gd::Graphics& g)
|
||
{
|
||
if (m_fonts == nullptr || m_theme == nullptr || m_targetRowRect.Width <= 0.0f)
|
||
{
|
||
return;
|
||
}
|
||
UpdateTargetRowGeometry();
|
||
|
||
const float labelWidth = kStyleLabelWidth * m_scale;
|
||
// 行标签与前五行一致（同一标签列宽度、同一纵向居中基准）。
|
||
UiText(g, L"目标", m_fonts->uiSmall,
|
||
gd::RectF(m_targetRowRect.X, m_targetRowRect.Y, labelWidth, m_targetRowRect.Height),
|
||
m_theme->textMuted, TextAlign::LEFT);
|
||
|
||
const SignalRef& target = SelectedRef();
|
||
const SignalData* signal =
|
||
(m_dataSet != nullptr && target.IsValid()) ? m_dataSet->Resolve(target) : nullptr;
|
||
|
||
// 没有可编辑的目标信号：只显示占位提示（与样式区其余行的"请选择信号"提示一致）。
|
||
if (signal == nullptr)
|
||
{
|
||
const float contentLeft = m_targetRowRect.X + labelWidth + kStyleLabelGap * m_scale;
|
||
UiText(g, L"未选择信号", m_fonts->uiSmall,
|
||
gd::RectF(contentLeft, m_targetRowRect.Y,
|
||
std::max(0.0f, m_targetRowRect.X + m_targetRowRect.Width - contentLeft),
|
||
m_targetRowRect.Height),
|
||
m_theme->textMuted, TextAlign::LEFT);
|
||
return;
|
||
}
|
||
|
||
// 名称：悬停时给一层与信号列表行一致的背景高亮（用户要求"显示与交互效果相同"）。
|
||
if (m_hoverStyle == StyleHit::TARGET_NAME && m_targetNameRect.Width > 0.0f)
|
||
{
|
||
UiFillRoundRect(g, m_targetNameRect, kCorner * m_scale, m_theme->hover);
|
||
}
|
||
|
||
if (m_editField == StyleEditField::SIGNAL_NAME && m_editRow < 0)
|
||
{
|
||
UiDrawEditField(g, EditFieldRect(), m_edit, m_fonts->ui, m_scale);
|
||
}
|
||
else
|
||
{
|
||
// 颜色与信号列表行一致：已绘制到网格用常态色，未绘制用弱色。
|
||
const std::uint32_t nameColor = (m_targetGeomLane >= 0) ? m_theme->text : m_theme->textMuted;
|
||
// ⚠️ 这里**不能**用 `PaintRowText`（它把文本裁到 `m_listRect`，而「目标」行在样式区、
|
||
// 列表矩形之外 ⇒ 文本会被完全裁掉，用户报告“信号名与 GX 标签都没正确绘制”）。
|
||
UiText(g, UiEllipsize(signal->name, m_fonts->ui, m_targetNameRect.Width), m_fonts->ui,
|
||
m_targetNameRect, nameColor, TextAlign::LEFT);
|
||
}
|
||
|
||
// GX 网格标签：信号已绘制到某个网格时显示在名称**后方**（用户 2026-10-15 要求），
|
||
// 并与其它控件一样**右对齐到内容列右边缘**。
|
||
if (m_targetBadgeRect.Width > 0.0f)
|
||
{
|
||
const bool badgeHot = (m_hoverStyle == StyleHit::TARGET_BADGE);
|
||
UiFillRoundRect(g, m_targetBadgeRect, kBadgeHeight * m_scale * 0.5f,
|
||
badgeHot ? m_theme->accentSoft : m_theme->cardBg);
|
||
UiDrawRoundRect(g, m_targetBadgeRect, kBadgeHeight * m_scale * 0.5f,
|
||
badgeHot ? m_theme->accent : m_theme->border, 1.0f);
|
||
UiText(g, L"G" + std::to_wstring(m_targetGeomLane + 1), m_fonts->monoSmall,
|
||
m_targetBadgeRect, badgeHot ? m_theme->textStrong : m_theme->text, TextAlign::CENTER);
|
||
}
|
||
}
|
||
|
||
|
||
} // namespace jdi
|
||
|