LuChiChick 44f1fcc592 commit for customized Makefile and build script. && Implemented a User_Main function call demo as a bridge to allow program execution to transition from main.c to C++ environment.

2026-09-14 20:11:48 +08:00

..

adc.h

commit for ADC1 config with three internal channel (Temperature Sensor, Vrefint and Vbat); Working on 32Mhz, single sequencer rank conversion mode with interrupt and overrun data written.

2026-08-31 21:39:30 +08:00

dma.h

commit for USART2 peripheral config with RX/TX DMA channels.

2026-08-03 20:23:53 +08:00

FreeRTOSConfig.h

commit for FreeRTOS config with 4K heap and 64 words minimal stack size based on CMSIS_V1 interface.

2026-08-04 14:54:10 +08:00

gpio.h

commit for a very basic initial project with SWD port config.

2026-08-03 19:49:55 +08:00

i2c.h

commit for I2C2 peripheral config with TX DMA channel, working on 400kHz fast mode.

2026-08-28 15:33:48 +08:00

main.h

commit for customized Makefile and build script. && Implemented a User_Main function call demo as a bridge to allow program execution to transition from main.c to C++ environment.

2026-09-14 20:11:48 +08:00

spi.h

commit for SPI1 config, working on 32 Mbit/s speed with low clock polarity (CPOL) and first edge clock phase (CPHA); PB3 has now been set as SPI1_CS pin with named user label, working on push pull mode.

2026-09-14 10:27:29 +08:00

stm32g0xx_hal_conf.h

commit for SPI1 config, working on 32 Mbit/s speed with low clock polarity (CPOL) and first edge clock phase (CPHA); PB3 has now been set as SPI1_CS pin with named user label, working on push pull mode.

2026-09-14 10:27:29 +08:00

stm32g0xx_it.h

commit for SPI1 config, working on 32 Mbit/s speed with low clock polarity (CPOL) and first edge clock phase (CPHA); PB3 has now been set as SPI1_CS pin with named user label, working on push pull mode.

2026-09-14 10:27:29 +08:00

tim.h

Modified 'Timebase Source' from TIM1 to TIM17, TIM1 now operates with 1 MHz input and 1 ms period, channel 1 is configured as PWM output mode and mapped to PA8 to drive a buzzer.

2026-08-06 14:02:24 +08:00

usart.h

commit for USART2 peripheral config with RX/TX DMA channels.

2026-08-03 20:23:53 +08:00