Import xPack OpenOCD 0.12.0-7 and GNU Make 4.4.1 from x86_64-w64-mingw32.

2026-09-14 16:20:05 +08:00
parent 2b73c30a9d
commit 534c017e0f
1133 changed files with 74341 additions and 0 deletions
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# script for stm8l family
+
+#
+# stm8 devices support SWIM transports only.
+#
+
+transport select swim
+
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME stm8l
+}
+
+# Work-area is a space in RAM used for flash programming
+# By default use 1kB
+if { [info exists WORKAREASIZE] } {
+   set _WORKAREASIZE $WORKAREASIZE
+} else {
+   set _WORKAREASIZE 0x400
+}
+
+if { [info exists FLASHSTART] } {
+   set _FLASHSTART $FLASHSTART
+} else {
+   set _FLASHSTART 0x8000
+}
+
+if { [info exists FLASHEND] } {
+   set _FLASHEND $FLASHEND
+} else {
+   set _FLASHEND 0xffff
+}
+
+if { [info exists EEPROMSTART] } {
+   set _EEPROMSTART $EEPROMSTART
+} else {
+   set _EEPROMSTART 0x4000
+}
+
+if { [info exists EEPROMEND] } {
+   set _EEPROMEND $EEPROMEND
+} else {
+   set _EEPROMEND 0x43ff
+}
+
+if { [info exists OPTIONSTART] } {
+   set _OPTIONSTART $OPTIONSTART
+} else {
+   set _OPTIONSTART 0x4800
+}
+
+if { [info exists OPTIONEND] } {
+   set _OPTIONEND $OPTIONEND
+} else {
+   set _OPTIONEND 0x487f
+}
+
+if { [info exists BLOCKSIZE] } {
+   set _BLOCKSIZE $BLOCKSIZE
+} else {
+   set _BLOCKSIZE 0x80
+}
+
+swim newtap $_CHIPNAME cpu
+
+set _TARGETNAME $_CHIPNAME.cpu
+
+target create $_TARGETNAME stm8 -chain-position $_CHIPNAME.cpu
+
+$_TARGETNAME configure -work-area-phys 0x0 -work-area-size $_WORKAREASIZE -work-area-backup 1
+$_TARGETNAME configure -flashstart $_FLASHSTART -flashend $_FLASHEND -eepromstart $_EEPROMSTART -eepromend $_EEPROMEND
+$_TARGETNAME configure -optionstart $_OPTIONSTART -optionend $_OPTIONEND -blocksize $_BLOCKSIZE
+
+# Uncomment this line to enable interrupts while instruction step
+#$_TARGETNAME configure -enable_step_irq
+
+# Set stm8l type
+$_TARGETNAME configure -enable_stm8l
+
+# Set high speed
+adapter speed 800
+# Set low speed
+#adapter speed 363
+
+reset_config srst_only
+
+#uncomment this line to connect under reset
+#reset_config srst_nogate connect_assert_srst