Import xPack OpenOCD 0.12.0-7 and GNU Make 4.4.1 from x86_64-w64-mingw32.

2026-09-14 16:20:05 +08:00
parent 2b73c30a9d
commit 534c017e0f
1133 changed files with 74341 additions and 0 deletions
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+#
+# script for Nordic nRF51 series, a Cortex-M0 chip
+#
+
+source [find target/swj-dp.tcl]
+
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME nrf51
+}
+
+if { [info exists ENDIAN] } {
+   set _ENDIAN $ENDIAN
+} else {
+   set _ENDIAN little
+}
+
+# Work-area is a space in RAM used for flash programming
+# By default use 16kB
+if { [info exists WORKAREASIZE] } {
+   set _WORKAREASIZE $WORKAREASIZE
+} else {
+   set _WORKAREASIZE 0x4000
+}
+
+if { [info exists CPUTAPID] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   set _CPUTAPID 0x0bb11477
+}
+
+swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
+
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+
+if {![using_hla]} {
+   # The chip supports standard ARM/Cortex-M0 SYSRESETREQ signal
+   cortex_m reset_config sysresetreq
+}
+
+flash bank $_CHIPNAME.flash nrf5 0x00000000 0 0 0 $_TARGETNAME
+flash bank $_CHIPNAME.uicr nrf5 0x10001000 0 0 0 $_TARGETNAME
+
+#  The chip should start up from internal 16Mhz RC, so setting adapter
+#  clock to 1Mhz should be OK
+adapter speed 1000
+
+proc enable_all_ram {} {
+	# nRF51822 Product Anomaly Notice (PAN) #16 explains that not all RAM banks
+	# are reliably enabled after reset on some revisions (contrary to spec.) So after
+	# resetting we enable all banks via the RAMON register
+	mww 0x40000524 0xF
+}
+$_TARGETNAME configure -event reset-init {  enable_all_ram }