Import xPack OpenOCD 0.12.0-7 and GNU Make 4.4.1 from x86_64-w64-mingw32.

2026-09-14 16:20:05 +08:00
parent 2b73c30a9d
commit 534c017e0f
1133 changed files with 74341 additions and 0 deletions
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# This is for the T-Home X300T / X301T IPTV box,
+# which are based on IPTV reference designs from Kiss/Cisco KMM-3***
+#
+# It has Sigma Designs SMP8634 chip.
+source [find target/smp8634.cfg]
+
+$_TARGETNAME configure -event reset-init { x300t_init }
+
+# 1MB CFI capable flash
+# flash bank <name> <driver> <base> <size> <chip_width> <bus_width> <target>
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0xac000000 0x100000 2 2 $_TARGETNAME
+
+proc x300t_init { } {
+	# Setup SDRAM config and flash mapping
+	# initialize ram
+	mww 0xa003fffc 3
+	mww 0xa003fffc 2
+	mww 0xa0030000 0xE34111BA
+	mww 0xa003fffc 0xa4444
+	mww 0xa003fffc 0
+
+	# remap boot vector in CPU local RAM
+	mww 0xa006f000 0x60000
+
+	# map flash to CPU address space REG_BASE_cpu_block+CPU_remap4
+	mww 0x0006f010 0x48000000
+
+	# map flash addr to REG_BASE_cpu_block + LR_XENV_LOCATION (normally done by XOS)
+	mww 0x00061ff0 0x48000000
+}