Import xPack OpenOCD 0.12.0-7 and GNU Make 4.4.1 from x86_64-w64-mingw32.

2026-09-14 16:20:05 +08:00
parent 2b73c30a9d
commit 534c017e0f
1133 changed files with 74341 additions and 0 deletions
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+source [find target/c100.cfg]
+# basic register definition for C100
+source [find target/c100regs.tcl]
+# board-config info
+source [find target/c100config.tcl]
+# C100 helper functions
+source [find target/c100helper.tcl]
+
+
+# Telo board & C100 support trst and srst
+# make the reset asserted to
+# allow RC circuit to discharge for: [ms]
+adapter srst pulse_width 100
+jtag_ntrst_assert_width 100
+# don't talk to JTAG after reset for: [ms]
+adapter srst delay 100
+jtag_ntrst_delay 100
+reset_config trst_and_srst separate
+
+
+
+
+# issue telnet: reset init
+# issue gdb: monitor reset init
+$_TARGETNAME configure -event reset-init {
+	adapter speed 100
+	# this will setup Telo board
+	setupTelo
+	#turn up the JTAG speed
+	adapter speed 3000
+	echo "JTAG speek now 3MHz"
+	echo "type helpC100 to get help on C100"
+}
+
+$_TARGETNAME configure -event reset-deassert-post {
+	# Force target into ARM state.
+#	soft_reset_halt ;# not implemented on ARM11
+	echo "Detected SRSRT asserted on C100.CPU"
+
+}
+
+$_TARGETNAME configure -event reset-assert-post {
+  echo "Assering reset"
+  #sleep 10
+}
+
+proc power_restore {} { echo "Sensed power restore. No action." }
+proc srst_deasserted {} { echo "Sensed nSRST deasserted. No action." }
+
+
+# boots from NOR on CS0:  8 MBytes CFI flash, 16-bit bus
+# it's really 16MB but the upper 8mb is controller via gpio
+# openocd does not support 'complex reads/writes' to NOR
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x20000000 0x01000000 2 2 $_TARGETNAME
+
+# writing data to memory does not work without this
+arm11 memwrite burst disable