Import xPack OpenOCD 0.12.0-7 and GNU Make 4.4.1 from x86_64-w64-mingw32.

2026-09-14 16:20:05 +08:00
parent 2b73c30a9d
commit 534c017e0f
1133 changed files with 74341 additions and 0 deletions
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# Configuration for the ST SPEAr310 Evaluation board
+# EVALSPEAr310 Rev. 2.0, modified to enable SRST on JTAG connector
+# http://www.st.com/spear
+#
+# List of board modifications to enable SRST, as reported in
+# ST Application Note AN3321.
+# - Modifications on the top layer:
+#    1. remove R137 and C57, located near the SMII PHY U18;
+#    2. remove R172 and C75, located near the SMII PHY U19;
+#    3. remove R207 and C90, located near the SMII PHY U20;
+#    4. remove C236, located near the SMII PHY U21;
+#    5. remove U12, located near the JTAG connector;
+#    6. solder together pins 7, 8 and 9 of U12;
+#    7. solder together pins 11, 12, 13, 14, 15, 16, 17 and 18 of U12.
+# - Modifications on the bottom layer:
+#    8. replace reset chip U11 with a STM6315SDW13F;
+#    9. add 0 ohm resistor R329. It is located close to JTAG connector.
+#
+# Date:      2009-10-31
+# Author:    Antonio Borneo <borneo.antonio@gmail.com>
+
+
+# Modified boards has SRST on JTAG connector
+set BOARD_HAS_SRST 1
+source [find board/spear310evb20.cfg]