Import xPack OpenOCD 0.12.0-7 and GNU Make 4.4.1 from x86_64-w64-mingw32.

2026-09-14 16:20:05 +08:00
parent 2b73c30a9d
commit 534c017e0f
1133 changed files with 74341 additions and 0 deletions
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+#
+# Be sure you include the speed and interface before this file
+# Example:
+# -c "adapter speed 5000" -f "interface/ftdi/olimex-arm-usb-tiny-h.cfg" -f "board/sifive/e31-arty.cfg"
+
+set _CHIPNAME riscv
+jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000001
+
+set _TARGETNAME $_CHIPNAME.cpu
+
+target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
+$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
+
+flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000
+init
+if {[ info exists pulse_srst]} {
+  ftdi set_signal nSRST 0
+  ftdi set_signal nSRST z
+}
+halt
+flash protect 0 64 last off
+echo "Ready for Remote Connections"
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+#
+# Be sure you include the speed and interface before this file
+# Example:
+# -c "adapter speed 5000" -f "interface/ftdi/olimex-arm-usb-tiny-h.cfg" -f "board/sifive/e51-arty.cfg"
+
+set _CHIPNAME riscv
+jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000001
+
+set _TARGETNAME $_CHIPNAME.cpu
+
+target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
+$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
+
+flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000
+init
+if {[ info exists pulse_srst]} {
+  ftdi set_signal nSRST 0
+  ftdi set_signal nSRST z
+}
+halt
+flash protect 0 64 last off
+echo "Ready for Remote Connections"
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+adapter speed 4000
+
+adapter driver jlink
+transport select jtag
+
+set _CHIPNAME riscv
+jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000913
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
+$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 0x4000 -work-area-backup 0
+
+flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME.0
+
+init
+
+jlink jtag 3
+
+halt
+flash protect 0 1 last off
+echo "Ready for Remote Connections"
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+adapter speed     10000
+
+adapter driver ftdi
+ftdi device_desc "Dual RS232-HS"
+ftdi vid_pid 0x0403 0x6010
+
+ftdi layout_init 0x0008 0x001b
+ftdi layout_signal nSRST -oe 0x0020 -data 0x0020
+
+#Reset Stretcher logic on FE310 is ~1 second long
+#This doesn't apply if you use
+# ftdi set_signal, but still good to document
+#adapter srst delay 1500
+
+set _CHIPNAME riscv
+jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME riscv -chain-position $_TARGETNAME
+$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
+
+flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME
+init
+#reset -- This type of reset is not implemented yet
+if {[ info exists pulse_srst]} {
+  ftdi set_signal nSRST 0
+  ftdi set_signal nSRST z
+  #Wait for the reset stretcher
+  #It will work without this, but
+  #will incur lots of delays for later commands.
+  sleep 1500
+}
+halt
+flash protect 0 64 last off