Import xPack OpenOCD 0.12.0-7 and GNU Make 4.4.1 from x86_64-w64-mingw32.

2026-09-14 16:20:05 +08:00
parent 2b73c30a9d
commit 534c017e0f
1133 changed files with 74341 additions and 0 deletions
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# Product page:
+# https://www.8devices.com/products/lima
+#
+# Location of JTAG pins:
+# J2 GPIO0	JTAG TCK
+# J2 GPIO1	JTAG TDI
+# J2 GPIO2	JTAG TDO
+# J2 GPIO3	JTAG TMS
+# J2 RST	directly connected to RESET_L of the SoC and can be used as
+#               JTAG SRST. Note: this pin will also reset the debug engine.
+# J1 +3,3V	Can be use as JTAG Vref
+# J1 or J2 GND	Can be used for JTAG GND
+#
+# This board is powered from mini USB connecter which is also used
+# as USB to UART converted based on FTDI FT230XQ chip
+
+source [find target/qualcomm_qca4531.cfg]
+
+proc board_init { } {
+	qca4531_ddr2_550_550_init
+}
+
+$_TARGETNAME configure -event reset-init {
+	board_init
+}
+
+set ram_boot_address 0xa0000000
+$_TARGETNAME configure -work-area-phys 0xa1FFE000 -work-area-size 0x1000
+
+flash bank flash0 ath79 0xbf000000 0 0 0 $_TARGETNAME cs0