commit for SPI1 config, working on 32 Mbit/s speed with low clock polarity (CPOL) and first edge clock phase (CPHA); PB3 has now been set as SPI1_CS pin with named user label, working on push pull mode.

STM32G030F6P6_Evaluation.ioc

@@ -106,36 +106,44 @@ Mcu.CPN=STM32G030F6P6TR
 Mcu.Family=STM32G0
 Mcu.IP0=ADC1
 Mcu.IP1=DMA
+Mcu.IP10=USART2
 Mcu.IP2=FREERTOS
 Mcu.IP3=I2C1
 Mcu.IP4=I2C2
 Mcu.IP5=NVIC
 Mcu.IP6=RCC
-Mcu.IP7=SYS
-Mcu.IP8=TIM1
-Mcu.IP9=USART2
-Mcu.IPNb=10
+Mcu.IP7=SPI1
+Mcu.IP8=SYS
+Mcu.IP9=TIM1
+Mcu.IPNb=11
 Mcu.Name=STM32G030F6Px
 Mcu.Package=TSSOP20
 Mcu.Pin0=PB8
 Mcu.Pin1=PB9
-Mcu.Pin10=PA12 [PA10]
-Mcu.Pin11=PA13
-Mcu.Pin12=PA14-BOOT0
-Mcu.Pin13=VP_ADC1_TempSens_Input
-Mcu.Pin14=VP_ADC1_Vref_Input
-Mcu.Pin15=VP_ADC1_Vbat_Input
-Mcu.Pin16=VP_FREERTOS_VS_CMSIS_V1
-Mcu.Pin17=VP_SYS_VS_tim17
+Mcu.Pin10=PA7
+Mcu.Pin11=PA8
+Mcu.Pin12=PA11 [PA9]
+Mcu.Pin13=PA12 [PA10]
+Mcu.Pin14=PA13
+Mcu.Pin15=PA14-BOOT0
+Mcu.Pin16=PB3
+Mcu.Pin17=PB4
+Mcu.Pin18=PB5
+Mcu.Pin19=PB6
 Mcu.Pin2=PC15-OSC32_OUT (PC15)
+Mcu.Pin20=VP_ADC1_TempSens_Input
+Mcu.Pin21=VP_ADC1_Vref_Input
+Mcu.Pin22=VP_ADC1_Vbat_Input
+Mcu.Pin23=VP_FREERTOS_VS_CMSIS_V1
+Mcu.Pin24=VP_SYS_VS_tim17
 Mcu.Pin3=PA0
 Mcu.Pin4=PA1
 Mcu.Pin5=PA2
 Mcu.Pin6=PA3
 Mcu.Pin7=PA4
-Mcu.Pin8=PA8
-Mcu.Pin9=PA11 [PA9]
-Mcu.PinsNb=18
+Mcu.Pin8=PA5
+Mcu.Pin9=PA6
+Mcu.PinsNb=25
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32G030F6Px
@@ -153,6 +161,7 @@ NVIC.I2C1_IRQn=true\:3\:0\:false\:false\:true\:true\:true\:true\:true
 NVIC.I2C2_IRQn=true\:3\:0\:false\:false\:true\:true\:true\:true\:true
 NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false
 NVIC.PendSV_IRQn=true\:3\:0\:false\:false\:false\:true\:false\:false\:false
+NVIC.SPI1_IRQn=true\:3\:0\:false\:false\:true\:true\:true\:true\:true
 NVIC.SVC_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false\:true
 NVIC.SavedPendsvIrqHandlerGenerated=true
 NVIC.SavedSvcallIrqHandlerGenerated=true
@@ -189,12 +198,25 @@ PA4.GPIO_Label=ENCODER_S_EXTI4
 PA4.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
 PA4.Locked=true
 PA4.Signal=GPXTI4
+PA5.Mode=Full_Duplex_Master
+PA5.Signal=SPI1_SCK
+PA6.Mode=Full_Duplex_Master
+PA6.Signal=SPI1_MISO
+PA7.Mode=Full_Duplex_Master
+PA7.Signal=SPI1_MOSI
 PA8.GPIOParameters=GPIO_Label
 PA8.GPIO_Label=BUZZER_PWM_OUT
 PA8.Locked=true
 PA8.Signal=S_TIM1_CH1
 PB0__PB1__PB2__PA8.StandardMode=true
+PB3.GPIOParameters=GPIO_Label
+PB3.GPIO_Label=SPI1_CS
+PB3.Locked=true
+PB3.Signal=GPIO_Output
 PB3__PB4__PB5__PB6.StandardMode=true
+PB4.Locked=true
+PB5.Locked=true
+PB6.Locked=true
 PB7__PB8.StandardMode=true
 PB8.Mode=I2C
 PB8.Signal=I2C1_SCL
@@ -250,7 +272,7 @@ ProjectManager.ToolChainLocation=
 ProjectManager.UAScriptAfterPath=
 ProjectManager.UAScriptBeforePath=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_USART2_UART_Init-USART2-false-HAL-true,5-MX_TIM1_Init-TIM1-false-HAL-true,6-MX_I2C1_Init-I2C1-false-HAL-true,7-MX_I2C2_Init-I2C2-false-HAL-true
+ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_USART2_UART_Init-USART2-false-HAL-true,5-MX_TIM1_Init-TIM1-false-HAL-true,6-MX_I2C1_Init-I2C1-false-HAL-true,7-MX_I2C2_Init-I2C2-false-HAL-true,8-MX_ADC1_Init-ADC1-false-HAL-true
 RCC.ADCFreq_Value=64000000
 RCC.AHBFreq_Value=64000000
 RCC.APBFreq_Value=64000000
@@ -285,6 +307,11 @@ SH.GPXTI4.0=GPIO_EXTI4
 SH.GPXTI4.ConfNb=1
 SH.S_TIM1_CH1.0=TIM1_CH1,PWM Generation1 CH1
 SH.S_TIM1_CH1.ConfNb=1
+SPI1.CalculateBaudRate=32.0 MBits/s
+SPI1.Direction=SPI_DIRECTION_2LINES
+SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
+SPI1.Mode=SPI_MODE_MASTER
+SPI1.VirtualType=VM_MASTER
 TIM1.AutoReloadPreload=TIM_AUTORELOAD_PRELOAD_ENABLE
 TIM1.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
 TIM1.IPParameters=Channel-PWM Generation1 CH1,Prescaler,Period,AutoReloadPreload