DeepSeek-V4.1-Flash
6b15575829
一、滚动过渡动画在巨型信号处卡顿 —— 真因是「退化成整幅重绘」 滚动到**从未构建过图层的区域**时，可见网格一个都贴不出图层像素 ⇒ BlitWideBuffer() 返回 false ⇒ 落到 Paint() 末尾的整幅重绘 ⇒ 把本帧全部可见网格的波形（含千万级采样的巨型信号）每帧重画一遍。 实测（MF4 124 网格 + VERY_BIG_DATA 5 网格，点选最后一个信号）：单帧 20~35ms，且「可见的巨型信号 网格数」越多越慢（0 个 ≈20ms、5 个 ≈34ms）；对照手动拖滚动条只要 ~6ms。 修法：BlitWideBuffer 只要还能画网格底衬（backing 非空）就返回 true， 只有 blits 与 backing 都为空时才交给整幅重绘 —— 这正是「没来得及画信号时就按只有网格叠底的状态继续滚动」。 实测：动画均值 23.0→11.2ms、最坏 35.6→13.1ms；含 5 个巨型信号网格的帧 33→10.7~12.3ms。 二、面板动画帧只重绘面板（额外 −2.7ms/帧） 新增 Application::m_panelDirty：滚动定时器在只有面板动画在跑时置位，Render 走 else if (panelOnly) 只重绘面板 + 分隔条（SignalPanel::Paint 会铺满自己的区域）。m_chromeDirty（真内容变化）仍走完整装饰重绘。 ⚠️ 回送仍是 if (fullFrame) {整窗} else {绘图区} 的无条件分支（遵守 §9.41）。 实测帧耗时拆解：plot 4.8ms / plot+panel 11.4ms / plot+全装饰 13.9ms。 三、分组行「N 项」计数：只折叠展开，绝不进入改名 新增 RowPart::GROUP_COUNT 与 SignalPanel::GroupStatsRect(row)（绘制与命中的唯一几何来源，命中矩形在 文本左右各外扩 3 逻辑像素）。RowHitPart 在名称区域之前判定计数区： - OnLButtonDown：折叠/展开；OnDoubleClick：只折叠/展开，任何点击频率都不进入改名； - DoubleClickIsPlainPress 返回 true ⇒ 快速连点每一击都生效。 ⚠️「快速双击进改名」的计时只对 RowPart::BODY 记录（否则“点计数、紧接着点名称”会被误判成双击）。 四、浮动面板首次出现的位置：右上角 旧默认位置 top = plotTop + 16 + laneIndex*28：上百个网格时 laneIndex 很大 ⇒ 被夹到右下角 （实测 plotH=1081 时 topMargin=964）。改为按「当前真正显示出来的面板中排在本面板之前的个数」错开 （固定遍历顺序：网格下标 → 面板种类），并把错开量夹到“面板下沿不超过绘图区 45% 高度”以内： 第一个面板错开 0 ⇒ 正好贴在上右角（实测 topMargin=24、rightMargin=24），6 个面板时最坏 topMargin=234。 ⚠️ 判定「面板是否显示」不能只看 *Panel.open —— LanePanelState::open 默认就是 true，必须同时看功能启用。 五、开关实验性功能 / 关闭面板卡顿 —— RebuildWideBuffer() 整批重建 四个 SetLane* 末尾都调 RebuildWideBuffer()（注释说是“预建宽缓冲基底”），而它同步重渲染全部网格的图层： 129 个网格（含 5 个千万级采样的巨型信号）整批重建要几百毫秒 ⇒ 点一下功能开关 / 关闭浮动面板就会卡住。 修法：新增 PlotView::EnsureLaneLayersPrefetched() —— 只有「图层数组与网格数量不符」（首次绘制 / 增删网格） 才同步整批建立；其余只 RollWideBuffer() 登记缺失/过期网格，由既有预算（每帧最多一个）逐帧补齐。 实测：几百毫秒 → ≤22ms；巨型信号网格上开关均值滤波同样 15ms 量级。 验证（全部离屏，不占用鼠标/键盘/屏幕） - 新增 .preflight/perf/lanescroll_main.cpp（lanescroll.exe）23/23：逐帧耗时 + 「可见巨型信号网格数」关联、 「N 项」计数热区与双击不进改名、面板首现位置与多面板错开、开着巨型信号的开关/关闭面板耗时。 - 既有回归：verify 49/49、panelanim 158/158、datacheck 69/69、edgecheck 46/46、errcheck 19/19、 gridanim 93/93。 - make release / make debug 零错误零警告（用 TARGET_FILE_NAME=TargetCheck/TargetCheckD 避免与运行中实例冲突）。 文档：Documents/agent_mem.md 新增 §9.44、§11.2 第 134–140 条与变更日志一行。
706 lines
29 KiB
C++
706 lines
29 KiB
C++
// SignalPanel 实现分片 —— 本文件只包含 SignalPanel 的**成员函数定义**（纯代码搬移，行为与拆分前完全一致）。
|
||
//
|
||
// 共用的常量与自由函数在 SignalPanelInternal.hpp（命名空间 `spdetail`，全部 inline）。
|
||
// 分片按“职责”划分：核心（状态/布局/几何）、渲染、交互与编辑，见各文件名。
|
||
#include "SignalPanelInternal.hpp"
|
||
|
||
namespace jdi
|
||
{
|
||
|
||
void SignalPanel::PaintStickyGroupRow(gd::Graphics& g, int row)
|
||
{
|
||
if (row < 0 || row >= static_cast<int>(m_rows.size()) ||
|
||
m_rows[static_cast<std::size_t>(row)].kind != RowKind::GROUP)
|
||
{
|
||
return;
|
||
}
|
||
|
||
const int rowCount = static_cast<int>(m_rows.size());
|
||
const float height = m_rows[static_cast<std::size_t>(row)].height;
|
||
const float naturalY = RowRect(row).Y;
|
||
const float stickyY = StickyGroupRowTop(row, rowCount);
|
||
if (stickyY + height <= m_listRect.Y + 0.5f)
|
||
{
|
||
return; // 已经整块滑出列表上边界
|
||
}
|
||
|
||
m_rowYOverrideActive = true;
|
||
m_rowYOverrideY = stickyY;
|
||
// 悬浮行必须是不透明的，否则下面的信号行会与组名叠在一起看不清；
|
||
// `FillRowRect` 会把矩形夹到列表矩形（GDI 填充不受 GDI+ 裁剪约束）。
|
||
SetRowClip(gd::RectF(m_listRect.X, stickyY, m_listRect.Width, height));
|
||
FillRowRect(g, gd::RectF(m_listRect.X, stickyY, m_listRect.Width, height), m_theme->panelBg);
|
||
PaintGroupRow(g, row);
|
||
ClearRowClip();
|
||
// 只有真正“浮”在其它行之上时才补一条底部边界线（否则会与正常绘制有差异）。
|
||
if (stickyY > naturalY + 0.5f)
|
||
{
|
||
UiDrawLine(g, m_listRect.X, stickyY + height - 0.5f, m_listRect.X + m_listRect.Width,
|
||
stickyY + height - 0.5f, m_theme->border, 1.0f);
|
||
}
|
||
m_rowYOverrideActive = false;
|
||
}
|
||
|
||
void SignalPanel::Paint(gd::Graphics& g)
|
||
{
|
||
if (m_theme == nullptr || m_fonts == nullptr)
|
||
{
|
||
return;
|
||
}
|
||
|
||
EnsureRows();
|
||
UiFillRect(g, m_area, m_theme->panelBg);
|
||
|
||
// 标题区。
|
||
{
|
||
std::wstring title = L"信号";
|
||
if (m_dataSet != nullptr && m_tab != nullptr)
|
||
{
|
||
title += L" · " + std::to_wstring(m_tab->VisibleCount()) + L"/" +
|
||
std::to_wstring(TotalSignalCount()) + L" 已选";
|
||
}
|
||
|
||
gd::RectF titleRect(m_headerRect.X + kPadding * m_scale, m_headerRect.Y,
|
||
std::max(20.0f, m_headerRect.Width - kPadding * 2.0f * m_scale -
|
||
m_toggleAllRect.Width - 8.0f * m_scale),
|
||
m_headerRect.Height);
|
||
UiText(g, UiEllipsize(title, m_fonts->uiBold, titleRect.Width), m_fonts->uiBold, titleRect,
|
||
m_theme->textStrong, TextAlign::LEFT);
|
||
|
||
const bool allVisible = AreAllSignalsVisible();
|
||
const std::wstring toggleLabel = allVisible ? L"全部隐藏" : L"全部显示";
|
||
const bool toggleHover = (m_hoverStyle == StyleHit::TOGGLE_ALL);
|
||
if (toggleHover)
|
||
{
|
||
UiFillRoundRect(g, m_toggleAllRect, kCorner * m_scale, m_theme->hover);
|
||
}
|
||
UiDrawRoundRect(g, m_toggleAllRect, kCorner * m_scale, m_theme->border, 1.0f);
|
||
const bool enabled = (m_dataSet != nullptr && !m_dataSet->Empty());
|
||
UiText(g, toggleLabel, m_fonts->uiSmall, m_toggleAllRect,
|
||
enabled ? m_theme->text : m_theme->textMuted, TextAlign::CENTER);
|
||
}
|
||
|
||
// 「筛选信号」输入框：未输入内容时显示占位提示，单击进入编辑，输入实时过滤下方列表。
|
||
{
|
||
UiFillRoundRect(g, m_filterRect, kCorner * m_scale, m_theme->cardBg);
|
||
UiDrawRoundRect(g, m_filterRect, kCorner * m_scale,
|
||
m_filterEditing ? m_theme->accent : m_theme->border,
|
||
m_filterEditing ? 1.6f : 1.0f);
|
||
|
||
const float pad = kFilterTextPad * m_scale;
|
||
const gd::RectF clearRect = FilterClearRect();
|
||
// 有输入内容时在右侧留出 ✕ 的位置，文本不会压到按钮上。
|
||
const float textRight = (clearRect.Width > 0.0f) ? clearRect.X : (m_filterRect.X + m_filterRect.Width);
|
||
const float textWidth = std::max(8.0f, textRight - pad - (m_filterRect.X + pad));
|
||
const gd::RectF textRect(m_filterRect.X + pad, m_filterRect.Y, textWidth,
|
||
m_filterRect.Height);
|
||
|
||
if (m_filterEditing)
|
||
{
|
||
// 外框（m_filterRect）已经画好了底板与强调色边框，这里只叠加文本内容。
|
||
// 若改用 UiDrawEditField，会在外框内部再套一个带边框的圆角框，
|
||
// 空内容时只剩一圈内框十分突兀（用户明确要求去掉这层"内圈"）。
|
||
gd::RectF fieldRect = FilterFieldRect();
|
||
fieldRect.Width = std::max(8.0f, textWidth + pad);
|
||
UiDrawEditFieldContent(g, fieldRect, m_filterEdit, m_fonts->uiSmall, m_scale);
|
||
}
|
||
else if (m_filterText.empty())
|
||
{
|
||
UiText(g, L"筛选信号", m_fonts->uiSmall, textRect, m_theme->textMuted, TextAlign::LEFT);
|
||
}
|
||
else
|
||
{
|
||
UiText(g, UiEllipsize(m_filterText, m_fonts->uiSmall, textWidth), m_fonts->uiSmall,
|
||
textRect, m_theme->text, TextAlign::LEFT);
|
||
}
|
||
|
||
// 清空按钮 ✕：仅在筛选框有内容时出现，悬停高亮（鼠标光标保持箭头）。
|
||
if (clearRect.Width > 0.0f)
|
||
{
|
||
const bool clearHot = (m_hoverStyle == StyleHit::FILTER_CLEAR);
|
||
if (clearHot)
|
||
{
|
||
UiFillRoundRect(g, clearRect, 3.0f * m_scale, WithAlpha(m_theme->danger, 0x33));
|
||
}
|
||
const std::uint32_t crossColor = clearHot ? m_theme->danger : m_theme->textMuted;
|
||
const float crossPad = clearRect.Width * 0.28f;
|
||
UiDrawLine(g, clearRect.X + crossPad, clearRect.Y + crossPad,
|
||
clearRect.X + clearRect.Width - crossPad,
|
||
clearRect.Y + clearRect.Height - crossPad, crossColor, 1.5f * m_scale);
|
||
UiDrawLine(g, clearRect.X + clearRect.Width - crossPad, clearRect.Y + crossPad,
|
||
clearRect.X + crossPad, clearRect.Y + clearRect.Height - crossPad, crossColor,
|
||
1.5f * m_scale);
|
||
}
|
||
}
|
||
|
||
// 列表区。
|
||
{
|
||
const int saveState = g.Save();
|
||
g.SetClip(gd::RectF(m_listRect.X, m_listRect.Y, m_listRect.Width, m_listRect.Height));
|
||
|
||
if (m_dataSet == nullptr || m_dataSet->Empty())
|
||
{
|
||
UiText(g, L"尚未加载数据，请打开数据文件", m_fonts->uiSmall, m_listRect, m_theme->textMuted,
|
||
TextAlign::CENTER);
|
||
}
|
||
else if (m_rows.empty() && !m_filterText.empty())
|
||
{
|
||
// 筛选结果为空：明确提示"无匹配"，而不是让人误以为数据丢失。
|
||
UiText(g, L"无匹配的筛选信号", m_fonts->uiSmall, m_listRect, m_theme->textMuted,
|
||
TextAlign::CENTER);
|
||
}
|
||
else
|
||
{
|
||
const int rowCount = static_cast<int>(m_rows.size());
|
||
// 先定出要「悬浮」的分组行（若有）：常规循环跳过它，最后统一钉在列表顶部绘制，
|
||
// 否则它会先被画一次在滚动位置上、又被画一次在顶部（视觉上重叠两份）。
|
||
const int stickyRow = StickyGroupRowIndex(rowCount);
|
||
for (int row = 0; row < rowCount; ++row)
|
||
{
|
||
if (row == stickyRow)
|
||
{
|
||
continue;
|
||
}
|
||
const gd::RectF rect = RowRect(row);
|
||
if (rect.Y + rect.Height < m_listRect.Y || rect.Y > m_listRect.Y + m_listRect.Height)
|
||
{
|
||
continue;
|
||
}
|
||
|
||
// 折起/展开动画：信号行整组向上平移，越过组名下边界的部分要“消失（藏进组名栏）”。
|
||
// 已经完全越过的行整行跳过（省一次绘制），部分越过的行把裁剪上边界抬到组名下边界；
|
||
// ⚠️ 此时还必须把 **GDI+ 裁剪**也收紧到同一条线 —— 行内的色块 / 复选框 / 网格徽标
|
||
// 走的是 GDI+ 绘制（只受 `SetClip` 约束），不收紧就会画到组名栏上面去。
|
||
const int rowSave = g.Save();
|
||
SetRowClip(rect);
|
||
const float hideTop = AnimationHideTopForRow(row, stickyRow);
|
||
if (hideTop > rect.Y + 0.5f)
|
||
{
|
||
if (rect.Y + rect.Height <= hideTop + 0.5f)
|
||
{
|
||
g.Restore(rowSave);
|
||
ClearRowClip();
|
||
continue;
|
||
}
|
||
ClampRowClipTop(hideTop);
|
||
g.SetClip(m_rowClipRect, gd::CombineModeIntersect);
|
||
}
|
||
|
||
if (m_rows[static_cast<std::size_t>(row)].kind == RowKind::GROUP)
|
||
{
|
||
PaintGroupRow(g, row);
|
||
}
|
||
else
|
||
{
|
||
PaintSignalRow(g, row);
|
||
}
|
||
g.Restore(rowSave);
|
||
ClearRowClip();
|
||
}
|
||
|
||
PaintStickyGroupRow(g, stickyRow);
|
||
}
|
||
|
||
g.Restore(saveState);
|
||
}
|
||
|
||
PaintScrollBar(g);
|
||
PaintStyleSection(g);
|
||
|
||
// 分隔线。
|
||
UiDrawLine(g, m_area.X + m_area.Width - 1.0f, m_area.Y, m_area.X + m_area.Width - 1.0f,
|
||
m_area.Y + m_area.Height, m_theme->border, 1.0f);
|
||
UiDrawLine(g, m_headerRect.X, m_headerRect.Y + m_headerRect.Height - 1.0f,
|
||
m_headerRect.X + m_headerRect.Width, m_headerRect.Y + m_headerRect.Height - 1.0f,
|
||
m_theme->border, 1.0f);
|
||
if (m_styleRect.Height > 0.0f)
|
||
{
|
||
UiDrawLine(g, m_styleRect.X, m_styleRect.Y, m_styleRect.X + m_styleRect.Width, m_styleRect.Y,
|
||
m_theme->border, 1.0f);
|
||
}
|
||
}
|
||
|
||
void SignalPanel::PaintRowText(gd::Graphics& g, const std::wstring& text, HFONT font,
|
||
const gd::RectF& rect, std::uint32_t argb, TextAlign align)
|
||
{
|
||
// 行内文本必须显式裁剪：GDI 文本不遵循 GDI+ 的 `SetClip`，
|
||
// 否则列表滚动时顶部那些“部分可见”的行会把组名/信号名画到筛选框上。
|
||
// 另外，分组折起动画期间行高会连续缩小 —— 此时必须裁到**本行矩形**内，
|
||
// 否则垂直居中的文字会溢出到相邻行上。
|
||
UiTextClipped(g, text, font, rect, argb, align, m_rowClipActive ? m_rowClipRect : m_listRect);
|
||
}
|
||
|
||
void SignalPanel::FillRowRect(gd::Graphics& g, const gd::RectF& rect, std::uint32_t argb)
|
||
{
|
||
// 夹取而不是裁剪：纯色填充下两者等价，而夹取对 `UiFillRect` 的 GDI 快路径同样有效
|
||
//（大面积不透明矩形会改走 GDI `FillRect`，它同样不受 GDI+ 裁剪约束）。
|
||
gd::RectF clipped = rect;
|
||
clipped.Intersect(m_rowClipActive ? m_rowClipRect : m_listRect);
|
||
if (clipped.Width <= 0.0f || clipped.Height <= 0.0f)
|
||
{
|
||
return;
|
||
}
|
||
UiFillRect(g, clipped, argb);
|
||
}
|
||
|
||
void SignalPanel::PaintGroupRow(gd::Graphics& g, int row)
|
||
{
|
||
if (m_dataSet == nullptr || m_tab == nullptr || row < 0 || row >= static_cast<int>(m_rows.size()))
|
||
{
|
||
return;
|
||
}
|
||
|
||
const ListRow& item = m_rows[static_cast<std::size_t>(row)];
|
||
const SignalGroup* group = m_dataSet->GroupAt(item.groupIndex);
|
||
if (group == nullptr)
|
||
{
|
||
return;
|
||
}
|
||
|
||
const gd::RectF rect = RowRect(row);
|
||
const bool hovered = (m_hoverRow == row);
|
||
if (hovered)
|
||
{
|
||
FillRowRect(g, rect, m_theme->hover);
|
||
}
|
||
FillRowRect(g, gd::RectF(rect.X, rect.Y, 2.0f * m_scale, rect.Height),
|
||
WithAlpha(m_theme->borderStrong, 0x90));
|
||
|
||
const float baseX = rect.X + kPadding * m_scale;
|
||
const float centerY = rect.Y + rect.Height * 0.5f;
|
||
const bool collapsed = IsGroupCollapsed(item.groupIndex);
|
||
|
||
// 折叠三角。
|
||
{
|
||
const float cx = baseX + kDisclosureWidth * m_scale * 0.5f;
|
||
const std::uint32_t color =
|
||
(hovered && m_hoverPart == RowPart::DISCLOSURE) ? m_theme->accent : m_theme->text;
|
||
UiDrawTriangleIcon(g, gd::RectF(cx - 6.0f * m_scale, centerY - 6.0f * m_scale, 12.0f * m_scale,
|
||
12.0f * m_scale),
|
||
color, collapsed ? IconDirection::RIGHT : IconDirection::DOWN);
|
||
}
|
||
|
||
// 分组复选框（三态：全选 / 部分 / 未选）。
|
||
const gd::RectF checkRect(baseX + kDisclosureWidth * m_scale, centerY - kCheckSize * m_scale * 0.5f,
|
||
kCheckSize * m_scale, kCheckSize * m_scale);
|
||
const bool allVisible = m_tab->GroupAllVisible(item.groupIndex);
|
||
const bool anyVisible = m_tab->GroupHasVisible(item.groupIndex);
|
||
UiDrawCheckBox(g, checkRect, allVisible ? 1 : (anyVisible ? 2 : 0), 3.0f * m_scale);
|
||
|
||
const gd::RectF closeRect = GroupCloseRect(row);
|
||
|
||
// 分组标题：左侧为“组X”标签，右侧以绘制的竖线分隔分组名（不使用字符），再显示可重命名的名称。
|
||
const std::wstring groupLabel = GroupLabelText(item.groupIndex);
|
||
// 项数文本与 `RowNameRect`（组名编辑框）、`GroupStatsRect`（命中区）共用同一来源，
|
||
// 保证“画的”与“点的”不漂移。
|
||
const std::wstring stats = GroupStatsText(row);
|
||
const float groupWidth = GroupLabelWidth(row);
|
||
const float statsWidth = UiMeasureTextWidth(m_fonts->uiSmall, stats);
|
||
const float statsRight = GroupCloseRect(row).X - 6.0f * m_scale;
|
||
const gd::RectF statsTextRect(statsRight - statsWidth, rect.Y, statsWidth, rect.Height);
|
||
const float nameLeft = checkRect.X + checkRect.Width + 8.0f * m_scale;
|
||
const float nameAreaLeft =
|
||
nameLeft + groupWidth + kGroupSeparatorGap * 2.0f * m_scale + kGroupSeparatorWidth * m_scale;
|
||
const float nameWidth =
|
||
std::max(20.0f, statsRight - statsWidth - 6.0f * m_scale - nameAreaLeft);
|
||
|
||
// 序号以强调色突出，便于在多组之间快速定位。
|
||
PaintRowText(g, groupLabel, m_fonts->uiBold, gd::RectF(nameLeft, rect.Y, groupWidth, rect.Height),
|
||
m_theme->accent, TextAlign::LEFT);
|
||
|
||
// 竖线分隔符：以绘制方式实现，与文字基线无关，排版更稳。
|
||
FillRowRect(g, gd::RectF(nameLeft + groupWidth + kGroupSeparatorGap * m_scale,
|
||
rect.Y + 7.0f * m_scale, kGroupSeparatorWidth * m_scale,
|
||
rect.Height - 14.0f * m_scale),
|
||
WithAlpha(m_theme->borderStrong, 0xB0));
|
||
|
||
if (m_editField == StyleEditField::GROUP_TITLE && m_editRow == row)
|
||
{
|
||
UiDrawEditField(g, RowNameRect(row), m_edit, m_fonts->uiSmall, m_scale);
|
||
}
|
||
else
|
||
{
|
||
PaintRowText(g, UiEllipsize(group->name, m_fonts->uiBold, nameWidth), m_fonts->uiBold,
|
||
gd::RectF(nameAreaLeft, rect.Y, nameWidth, rect.Height), m_theme->textStrong,
|
||
TextAlign::LEFT);
|
||
}
|
||
|
||
PaintRowText(g, stats, m_fonts->uiSmall, statsTextRect, m_theme->textMuted,
|
||
TextAlign::RIGHT);
|
||
|
||
// 关闭按钮（从工作区移除该分组）。
|
||
const bool closeHot = hovered && (m_hoverPart == RowPart::CLOSE);
|
||
if (closeHot)
|
||
{
|
||
UiFillRoundRect(g, closeRect, 3.0f * m_scale, m_theme->pressed);
|
||
}
|
||
UiDrawCrossIcon(g, closeRect, closeHot ? m_theme->danger : m_theme->textMuted, 1.5f * m_scale);
|
||
}
|
||
|
||
void SignalPanel::PaintSignalRow(gd::Graphics& g, int row)
|
||
{
|
||
if (m_dataSet == nullptr || m_tab == nullptr || row < 0 || row >= static_cast<int>(m_rows.size()))
|
||
{
|
||
return;
|
||
}
|
||
|
||
const ListRow& item = m_rows[static_cast<std::size_t>(row)];
|
||
const SignalRef ref{item.groupIndex, item.signalIndex};
|
||
const SignalData* signal = m_dataSet->Resolve(ref);
|
||
const SignalStyle* style = StyleOf(ref);
|
||
if (signal == nullptr || style == nullptr)
|
||
{
|
||
return;
|
||
}
|
||
|
||
const gd::RectF rect = RowRect(row);
|
||
const bool selected = (SelectedRef() == ref);
|
||
const bool hovered = (m_hoverRow == row);
|
||
|
||
if (selected)
|
||
{
|
||
FillRowRect(g, rect, m_theme->selection);
|
||
FillRowRect(g, gd::RectF(rect.X, rect.Y, 2.0f * m_scale, rect.Height), m_theme->accent);
|
||
}
|
||
else if (hovered)
|
||
{
|
||
FillRowRect(g, rect, m_theme->hover);
|
||
}
|
||
|
||
const float baseX = rect.X + kPadding * m_scale + kIndent * m_scale;
|
||
const float centerY = rect.Y + rect.Height * 0.5f;
|
||
|
||
// 复选框。
|
||
const gd::RectF checkRect(baseX + kDisclosureWidth * m_scale, centerY - kCheckSize * m_scale * 0.5f,
|
||
kCheckSize * m_scale, kCheckSize * m_scale);
|
||
// 可见性属于当前标签页，与全局共享的显示外观分开读取。
|
||
const bool visible = m_tab->IsVisible(ref);
|
||
UiDrawCheckBox(g, checkRect, visible ? 1 : 0, 3.0f * m_scale);
|
||
|
||
// 颜色块：叠加不透明度，透明度过低时自动补描边（与样式区色块规则一致）。
|
||
const gd::RectF swatchRect(checkRect.X + checkRect.Width + 6.0f * m_scale,
|
||
centerY - kSwatchSize * m_scale * 0.5f, kSwatchSize * m_scale,
|
||
kSwatchSize * m_scale);
|
||
UiDrawSwatch(g, swatchRect, style->color, visible ? style->opacity : 0.3f, 2.5f * m_scale,
|
||
m_scale);
|
||
|
||
// 网格徽标（可点击，用于调整所属网格）。行尾 ✕ 恒在最右侧，徽标整体前移让位。
|
||
const int laneIndex = m_tab->LaneOfSignal(ref);
|
||
const bool badgeVisible = (laneIndex >= 0) && visible;
|
||
const gd::RectF badgeRect = SignalBadgeRect(row);
|
||
const gd::RectF removeRect = SignalRemoveRect(row);
|
||
|
||
float nameRightLimit = removeRect.X - 6.0f * m_scale;
|
||
if (badgeVisible)
|
||
{
|
||
nameRightLimit = badgeRect.X - 6.0f * m_scale;
|
||
}
|
||
|
||
// 名称：完全保留文件内的列名（含 "[n]" 序号与括号描述），双击可重命名。
|
||
const float nameLeft = swatchRect.X + swatchRect.Width + 6.0f * m_scale;
|
||
if (m_editField == StyleEditField::SIGNAL_NAME && m_editRow == row)
|
||
{
|
||
UiDrawEditField(g, RowNameRect(row), m_edit, m_fonts->ui, m_scale);
|
||
}
|
||
else
|
||
{
|
||
const float nameWidth = std::max(16.0f, nameRightLimit - nameLeft);
|
||
const std::uint32_t nameColor = visible ? m_theme->text : m_theme->textMuted;
|
||
PaintRowText(g, UiEllipsize(signal->name, m_fonts->ui, nameWidth), m_fonts->ui,
|
||
gd::RectF(nameLeft, rect.Y, nameWidth, rect.Height), nameColor, TextAlign::LEFT);
|
||
}
|
||
|
||
if (badgeVisible)
|
||
{
|
||
const bool badgeHot = hovered && (m_hoverPart == RowPart::LANE_BADGE);
|
||
UiFillRoundRect(g, badgeRect, kBadgeHeight * m_scale * 0.5f,
|
||
badgeHot ? m_theme->accentSoft : m_theme->cardBg);
|
||
UiDrawRoundRect(g, badgeRect, kBadgeHeight * m_scale * 0.5f,
|
||
badgeHot ? m_theme->accent : m_theme->border, 1.0f);
|
||
PaintRowText(g, L"G" + std::to_wstring(laneIndex + 1), m_fonts->monoSmall, badgeRect,
|
||
badgeHot ? m_theme->textStrong : m_theme->text, TextAlign::CENTER);
|
||
}
|
||
|
||
// 「移除该信号」✕：位于信号条目最右端，尺寸/样式/右边距与分组行的关闭 ✕ 完全一致。
|
||
// 最后绘制，确保它永远压在最上层（与分组行 ✕ 的绘制顺序保持一致）。
|
||
{
|
||
const bool removeHot = hovered && (m_hoverPart == RowPart::REMOVE_SIGNAL);
|
||
if (removeHot)
|
||
{
|
||
UiFillRoundRect(g, removeRect, 3.0f * m_scale, m_theme->pressed);
|
||
}
|
||
UiDrawCrossIcon(g, removeRect, removeHot ? m_theme->danger : m_theme->textMuted,
|
||
1.5f * m_scale);
|
||
}
|
||
}
|
||
|
||
void SignalPanel::PaintScrollBar(gd::Graphics& g)
|
||
{
|
||
if (!m_scrollBarVisible || m_contentHeight <= m_listRect.Height)
|
||
{
|
||
return;
|
||
}
|
||
|
||
UiFillRoundRect(g, m_scrollBarRect, kScrollBarThickness * m_scale * 0.5f, m_theme->gridWeak);
|
||
UiFillRoundRect(g, ScrollThumbRect(), kScrollBarThickness * m_scale * 0.5f, m_theme->borderStrong);
|
||
}
|
||
|
||
void SignalPanel::PaintStyleSection(gd::Graphics& g)
|
||
{
|
||
if (m_styleRect.Height <= 0.0f)
|
||
{
|
||
return;
|
||
}
|
||
|
||
UiFillRect(g, m_styleRect, m_theme->panelBg);
|
||
|
||
// ---- 顶部「目标」行（无论是否已选中信号都要绘制：未选中时显示占位文本）----
|
||
PaintTargetRow(g);
|
||
|
||
const SignalStyle* style = (m_tab == nullptr) ? nullptr : StyleOf(SelectedRef());
|
||
if (style == nullptr || SelectedRef().IsValid() == false)
|
||
{
|
||
// 提示文本只占「目标」行以下的区域，避免与目标行重叠。
|
||
const float top = m_targetRowRect.Y + m_targetRowRect.Height;
|
||
UiText(g, L"请选择信号以编辑样式", m_fonts->uiSmall,
|
||
gd::RectF(m_styleRect.X, top, m_styleRect.Width,
|
||
std::max(0.0f, m_styleRect.Y + m_styleRect.Height - top)),
|
||
m_theme->textMuted, TextAlign::CENTER);
|
||
return;
|
||
}
|
||
|
||
const float labelWidth = kStyleLabelWidth * m_scale;
|
||
|
||
// 行标签统一以整行为基准垂直居中，确保与同行控件纵向对齐。
|
||
auto paintRowLabel = [&](int rowIndex, const wchar_t* text)
|
||
{
|
||
const gd::RectF& row = m_styleRowRects[static_cast<std::size_t>(rowIndex)];
|
||
UiText(g, text, m_fonts->uiSmall, gd::RectF(row.X, row.Y, labelWidth, row.Height),
|
||
m_theme->textMuted, TextAlign::LEFT);
|
||
};
|
||
|
||
// ---- 第一行：颜色（预设色块 + 自定义颜色入口）----
|
||
{
|
||
paintRowLabel(0, L"颜色");
|
||
|
||
int paletteCount = 0;
|
||
const std::uint32_t* palette = SignalPalette(paletteCount);
|
||
|
||
// 判定“当前是否在用自定义色”：必须同时满足
|
||
// 1) 显示颜色等于记忆的自定义色；
|
||
// 2) 该颜色不是任何一个可见的预设色。
|
||
// 否则一旦自定义色与某个预设色相同时，点击那个预设色块会把高亮错误地
|
||
// 挪到自定义色块上（用户报告的“点预设色直接跳到自定义色块”）。
|
||
bool presetMatches = false;
|
||
for (int index = 0; index < m_colorCount; ++index)
|
||
{
|
||
if (style->color == palette[index % paletteCount])
|
||
{
|
||
presetMatches = true;
|
||
break;
|
||
}
|
||
}
|
||
const bool customActive = (style->color == style->customColor) && !presetMatches;
|
||
for (int index = 0; index < m_colorCount; ++index)
|
||
{
|
||
const gd::RectF& rect = m_colorRects[static_cast<std::size_t>(index)];
|
||
const std::uint32_t color = palette[index % paletteCount];
|
||
const bool hovered = (m_hoverStyle == StyleHit::COLOR && m_hoverStyleIndex == index);
|
||
const bool active = !customActive && (style->color == color);
|
||
|
||
// 预设色块同样叠加不透明度；透明度过低时自动补描边以保证可辨识（与自定义色块一致）。
|
||
UiDrawSwatch(g, rect, color, style->opacity, kCorner * m_scale, m_scale);
|
||
if (active || hovered)
|
||
{
|
||
const gd::RectF ring(rect.X - 2.0f * m_scale, rect.Y - 2.0f * m_scale,
|
||
rect.Width + 4.0f * m_scale, rect.Height + 4.0f * m_scale);
|
||
UiDrawRoundRect(g, ring, 5.0f * m_scale,
|
||
active ? m_theme->textStrong : m_theme->borderStrong,
|
||
active ? 1.6f : 1.0f);
|
||
}
|
||
}
|
||
|
||
// 自定义颜色入口：与预设色块完全同尺寸、同外框规则的小方格，仅多一个加号图标。
|
||
// 方格始终显示记忆的自定义颜色，因此从任意预设色再次点击它都能立即回到上次的自定义色。
|
||
const bool chipHot = (m_hoverStyle == StyleHit::CUSTOM_CHIP);
|
||
const std::uint32_t chipColor =
|
||
UiDrawSwatch(g, m_customChipRect, style->customColor, style->opacity, kCorner * m_scale, m_scale);
|
||
const std::uint32_t iconColor = IsDarkColor(chipColor) ? 0xFFFDF6E3u : 0xFF073642u;
|
||
UiDrawPlusIcon(g, m_customChipRect, iconColor, 1.6f * m_scale);
|
||
|
||
// 当前正在使用自定义颜色、或鼠标悬停时，显示与预设色块一致的外框。
|
||
if (customActive || chipHot)
|
||
{
|
||
const gd::RectF& chip = m_customChipRect;
|
||
const gd::RectF ring(chip.X - 2.0f * m_scale, chip.Y - 2.0f * m_scale,
|
||
chip.Width + 4.0f * m_scale, chip.Height + 4.0f * m_scale);
|
||
UiDrawRoundRect(g, ring, 5.0f * m_scale,
|
||
customActive ? m_theme->textStrong : m_theme->borderStrong,
|
||
customActive ? 1.6f : 1.0f);
|
||
}
|
||
}
|
||
|
||
// ---- 第二行：样式（线段 / 散点 / 点线）----
|
||
// ⚠️ 单点信号固定使用「散点」：「线段」在单个数据点上完全画不出来、「点线」与
|
||
// 「放大自动点线」语义重叠，因此它们对单点信号**置灰且不可点**（用户 2026-10-16 要求）。
|
||
{
|
||
paintRowLabel(1, L"样式");
|
||
|
||
for (int index = 0; index < kModeOptionCount; ++index)
|
||
{
|
||
const gd::RectF& rect = m_modeRects[static_cast<std::size_t>(index)];
|
||
const bool enabled = ModeOptionEnabled(index);
|
||
const bool active = (style->mode == kModeOptions[index]);
|
||
const bool hovered =
|
||
enabled && (m_hoverStyle == StyleHit::MODE && m_hoverStyleIndex == index);
|
||
|
||
UiFillRoundRect(g, rect, kCorner * m_scale,
|
||
active ? m_theme->accentSoft : (hovered ? m_theme->hover : m_theme->cardBg));
|
||
UiDrawRoundRect(g, rect, kCorner * m_scale, active ? m_theme->accent : m_theme->border, 1.0f);
|
||
UiText(g, DrawModeName(kModeOptions[index]), m_fonts->uiSmall, rect,
|
||
!enabled ? m_theme->textMuted
|
||
: (active ? m_theme->textStrong : m_theme->text),
|
||
TextAlign::CENTER);
|
||
}
|
||
}
|
||
|
||
// ---- 第三行：调整（系数 / 镜像 / 绝对值，三个切换类按钮）----
|
||
// 结算顺序固定为「系数 → 绝对值 → 镜像」；「系数」「镜像」点击后展开二级面板。
|
||
{
|
||
paintRowLabel(2, L"调整");
|
||
|
||
const auto paintToggle = [&](int index, const wchar_t* label, bool checked, StyleHit target)
|
||
{
|
||
const gd::RectF& rect = m_adjustRects[static_cast<std::size_t>(index)];
|
||
const bool hot = (m_hoverStyle == target);
|
||
UiFillRoundRect(g, rect, kCorner * m_scale,
|
||
checked ? m_theme->accentSoft : (hot ? m_theme->hover : m_theme->cardBg));
|
||
UiDrawRoundRect(g, rect, kCorner * m_scale,
|
||
checked ? m_theme->accent : m_theme->border, 1.0f);
|
||
UiText(g, label, m_fonts->uiSmall, rect,
|
||
checked ? m_theme->textStrong : m_theme->text, TextAlign::CENTER);
|
||
};
|
||
// 系数/偏移：系数不等于默认值 1、或任一偏移不为 0 时显示为"已启用"。
|
||
paintToggle(kAdjustGain, L"系数/偏移",
|
||
!GainIsDefault(style->gain) || style->Offset(), StyleHit::GAIN_ADJUST);
|
||
// 镜像：水平或垂直任一被勾选即显示为激活态。
|
||
paintToggle(kAdjustMirror, L"镜像", style->Mirrored(), StyleHit::MIRROR_ADJUST);
|
||
paintToggle(kAdjustAbsolute, L"绝对值", style->absolute, StyleHit::ABSOLUTE_TOGGLE);
|
||
}
|
||
|
||
// ---- 第四行：线宽（数值可点击输入）----
|
||
{
|
||
paintRowLabel(3, L"线宽");
|
||
|
||
const double ratio =
|
||
(static_cast<double>(style->lineWidth) - kWidthMin) / (kWidthMax - kWidthMin);
|
||
const bool active = m_draggingWidth || (m_hoverStyle == StyleHit::WIDTH_SLIDER);
|
||
UiDrawSlider(g, m_widthTrackRect, ratio, m_theme->accent, active, m_scale);
|
||
|
||
if (m_editField == StyleEditField::WIDTH)
|
||
{
|
||
UiDrawEditField(g, m_widthValueRect, m_edit, m_fonts->monoSmall, m_scale);
|
||
}
|
||
else
|
||
{
|
||
const std::wstring numberText = FormatNumber(style->lineWidth, 1);
|
||
const std::wstring fullText = numberText + L" px";
|
||
// 空间不足时省略单位，保证数值本身完整可读。
|
||
const std::wstring shown =
|
||
(UiMeasureTextWidth(m_fonts->monoSmall, fullText) >
|
||
m_widthValueRect.Width - 6.0f * m_scale)
|
||
? numberText
|
||
: fullText;
|
||
UiText(g, shown, m_fonts->monoSmall, m_widthValueRect, m_theme->textStrong, TextAlign::RIGHT);
|
||
}
|
||
}
|
||
|
||
// ---- 第五行：透明度（数值可点击输入）----
|
||
{
|
||
paintRowLabel(4, L"透明度");
|
||
|
||
const bool active = m_draggingOpacity || (m_hoverStyle == StyleHit::OPACITY_SLIDER);
|
||
UiDrawSlider(g, m_opacityTrackRect, static_cast<double>(style->opacity), m_theme->accent, active,
|
||
m_scale);
|
||
|
||
if (m_editField == StyleEditField::OPACITY)
|
||
{
|
||
UiDrawEditField(g, m_opacityValueRect, m_edit, m_fonts->monoSmall, m_scale);
|
||
}
|
||
else
|
||
{
|
||
const int percent = static_cast<int>(style->opacity * 100.0f + 0.5f);
|
||
UiText(g, std::to_wstring(percent) + L"%", m_fonts->monoSmall, m_opacityValueRect,
|
||
m_theme->textStrong, TextAlign::RIGHT);
|
||
}
|
||
}
|
||
}
|
||
|
||
void SignalPanel::PaintTargetRow(gd::Graphics& g)
|
||
{
|
||
if (m_fonts == nullptr || m_theme == nullptr || m_targetRowRect.Width <= 0.0f)
|
||
{
|
||
return;
|
||
}
|
||
UpdateTargetRowGeometry();
|
||
|
||
const float labelWidth = kStyleLabelWidth * m_scale;
|
||
// 行标签与前五行一致（同一标签列宽度、同一纵向居中基准）。
|
||
UiText(g, L"目标", m_fonts->uiSmall,
|
||
gd::RectF(m_targetRowRect.X, m_targetRowRect.Y, labelWidth, m_targetRowRect.Height),
|
||
m_theme->textMuted, TextAlign::LEFT);
|
||
|
||
const SignalRef& target = SelectedRef();
|
||
const SignalData* signal =
|
||
(m_dataSet != nullptr && target.IsValid()) ? m_dataSet->Resolve(target) : nullptr;
|
||
|
||
// 没有可编辑的目标信号：只显示占位提示（与样式区其余行的"请选择信号"提示一致）。
|
||
if (signal == nullptr)
|
||
{
|
||
const float contentLeft = m_targetRowRect.X + labelWidth + kStyleLabelGap * m_scale;
|
||
UiText(g, L"未选择信号", m_fonts->uiSmall,
|
||
gd::RectF(contentLeft, m_targetRowRect.Y,
|
||
std::max(0.0f, m_targetRowRect.X + m_targetRowRect.Width - contentLeft),
|
||
m_targetRowRect.Height),
|
||
m_theme->textMuted, TextAlign::LEFT);
|
||
return;
|
||
}
|
||
|
||
// 名称：悬停时给一层与信号列表行一致的背景高亮（用户要求"显示与交互效果相同"）。
|
||
if (m_hoverStyle == StyleHit::TARGET_NAME && m_targetNameRect.Width > 0.0f)
|
||
{
|
||
UiFillRoundRect(g, m_targetNameRect, kCorner * m_scale, m_theme->hover);
|
||
}
|
||
|
||
if (m_editField == StyleEditField::SIGNAL_NAME && m_editRow < 0)
|
||
{
|
||
UiDrawEditField(g, EditFieldRect(), m_edit, m_fonts->ui, m_scale);
|
||
}
|
||
else
|
||
{
|
||
// 颜色与信号列表行一致：已绘制到网格用常态色，未绘制用弱色。
|
||
const std::uint32_t nameColor = (m_targetGeomLane >= 0) ? m_theme->text : m_theme->textMuted;
|
||
// ⚠️ 这里**不能**用 `PaintRowText`（它把文本裁到 `m_listRect`，而「目标」行在样式区、
|
||
// 列表矩形之外 ⇒ 文本会被完全裁掉，用户报告“信号名与 GX 标签都没正确绘制”）。
|
||
UiText(g, UiEllipsize(signal->name, m_fonts->ui, m_targetNameRect.Width), m_fonts->ui,
|
||
m_targetNameRect, nameColor, TextAlign::LEFT);
|
||
}
|
||
|
||
// GX 网格标签：信号已绘制到某个网格时显示在名称**后方**（用户 2026-10-15 要求），
|
||
// 并与其它控件一样**右对齐到内容列右边缘**。
|
||
if (m_targetBadgeRect.Width > 0.0f)
|
||
{
|
||
const bool badgeHot = (m_hoverStyle == StyleHit::TARGET_BADGE);
|
||
UiFillRoundRect(g, m_targetBadgeRect, kBadgeHeight * m_scale * 0.5f,
|
||
badgeHot ? m_theme->accentSoft : m_theme->cardBg);
|
||
UiDrawRoundRect(g, m_targetBadgeRect, kBadgeHeight * m_scale * 0.5f,
|
||
badgeHot ? m_theme->accent : m_theme->border, 1.0f);
|
||
UiText(g, L"G" + std::to_wstring(m_targetGeomLane + 1), m_fonts->monoSmall,
|
||
m_targetBadgeRect, badgeHot ? m_theme->textStrong : m_theme->text, TextAlign::CENTER);
|
||
}
|
||
}
|
||
|
||
|
||
} // namespace jdi
|
||
|