修复五项交互缺陷：折起后滚动条 / 单点信号样式 / 线宽实时生效 / 网格菜单限高滚动 / 点选信号滚动绘图区

1) 分组折起后再展开，信号列表的滚动条消失（筛选态与常规态均可复现）
   - 根因：AdvanceGroupAnimations 只在“折起完成”时重建行集合；而“展开完成”那一帧
     m_contentHeight 从收起态跳回展开态，却没有任何路径重算滚动条可见性 ⇒ 滚动条停在隐藏。
   - 修法：任一方向动画结束都 m_rowsDirty = true + BuildRows()，并每帧 RefreshScrollBar(false)。
     ⚠️ 动画期间不夹取滚动偏移，避免打断与滚动同步的折起动画（scrollSynced）。

2) 单点信号（finiteCount == 1）默认绘制方式由「点线」改为「散点」
   - ApplySinglePointDefaultStyle → DrawMode::SCATTER（仍取最大线宽）。
   - 新增 SignalPanel::ModeOptionEnabled：单点信号的「线段」「点线」置灰、不可点、
     且不参与悬停高亮（避免“看着能点其实点不动”）；样式区的绘制与命中都用它。
   - PlotView::UpdateAutoScatterStyles 跳过单点信号，否则“放大自动点线”会把它又改回「点线」。

3) 拖动线宽滑块完全不生效（拖动时线宽不变、松手瞬间变了、再移动鼠标又变回去）
   - 根因一：AcquirePolyline 的折线缓存键没有 lineWidth，而 BuildPolyline 把线宽烘进
     包络带几何（每个像素列的上下包络各向外扩 max(1,线宽)*scale*0.5，「梳状」判定也依赖它）
     ⇒ 稠密信号（采样数 > 绘图区宽度）永远复用旧线宽的顶点与包络带。
   - 根因二：样式补丁只更新“静态场景缓存 + 后备缓冲区”，而每网格图层（宽基底）仍是旧样式像素，
     下一帧命中“宽基底快路径”时把新样式覆盖回旧像素。
   - 修法：PolylineCacheEntry 增加 lineWidth 并进比较；
     样式补丁之后 QueueLaneRebuild(受影响网格) + RenderPendingLaneRebuilds(1)（沿用每帧至多 1 个的预算）。

4) 「目标」行的 GX 标签复用「所属网格」菜单，并先给 PopupMenu 增加「限高 + 条目区滚动 + 尾部固定项」
   - MenuLayoutConstraint::maxHeight（OpenLaneMenu 传客户区高度的 62%）；
   - 固定区 = 最后一个分隔线及其之后的条目（即「新建网格」）始终钉在菜单底部，其余条目可滚动；
   - 滚轮滚动条目区（Application 在菜单内滚动时不再关闭菜单，其余情形保持既有行为）；
   - 键盘移动悬停项自动滚入可视区（EnsureItemVisible）；ItemAtPoint 要求条目同时命中滚动视口；
   - 滚动区文本用 UiTextClipped（GDI 文本不遵循 GDI+ SetClip），并跳过完全不可见的条目（性能）；
   - BuildLayout 不再无条件清零 m_scrollOffset（否则 RebuildLayout 会把滚轮位置吃掉）；
   - 「目标」行 GX 标签点击**不参与**联动滚动（悬停联动保留）。

5) 点选信号名 ⇒ 绘图区自动把目标网格滚动到可视区内（上百个独立网格时旧有高亮无法定位）
   - SignalPanel::RequestPlotLaneScroll / TakePlotLaneScrollRequest；
     Application::ApplyPendingPlotLaneScroll（WM_LBUTTONDOWN 的面板分支）；
     PlotView::ScrollLaneIntoView（在可视区上方就上滚、在下方就下滚、已完整可见则不动）。
   - 只有“点击信号名”触发；悬停绝不改变视图；勾选框 / GX 徽标 / 移除 ✕ 也不触发。

验证（全部离屏执行，窗口 SW_HIDE + 只注入合成消息 + 进程与线程 BELOW_NORMAL，
不移动真实光标、不抢焦点、不截屏）：
- 新增 .preflight/check（不入库）68/68 通过；
- A/B：五处修复全部回退 ⇒ 17 项如实失败（B 4 / C 4 / D 7 / E 2）；“折起后滚动条”需要
  逐帧重绘驱动动画才能复现，单独回退时 ⇒ 5 项如实失败；恢复后 68/68；
- make release / make debug 零警告。

其它：
- 按要求删除工作区 Tools/（structcheck 脚本）并移除 Makefile 的 structcheck 目标；
- Documents/agent_mem.md 同步：新增 §9.38、§11.2 第 97–103 条与变更日志一行。

Tools/structcheck.ps1

@@ -1,275 +0,0 @@
-# Structural verification (NOT part of the shipped app; under .preflight/, gitignored).
-#
-# Proves on disk -- not by prose -- that the two structural requirements are satisfied:
-#   [1] The giant implementation files were split by responsibility into sibling files
-#       under each component's own Src/ (and each new translation unit is compiled).
-#   [2] The common UI controls live in a real `Components/Shared` component, are compiled
-#       into the binary, and are consumed by the other components.
-#
-# Run: powershell -File .preflight\perf\structcheck.ps1
-# ASCII only (PowerShell 5.1 reads .ps1 as ANSI).
-
-$ErrorActionPreference = "Stop"
-$root = Split-Path -Parent $PSScriptRoot
-Set-Location $root
-
-$pass = 0
-$fail = 0
-
-function Check([bool]$ok, [string]$what) {
-    if ($ok) { $script:pass++ ; Write-Host ("  OK   " + $what) }
-    else     { $script:fail++ ; Write-Host ("  FAIL " + $what) }
-}
-
-function Lines([string]$path) {
-    if (-not (Test-Path $path)) { return -1 }
-    return (Get-Content $path | Measure-Object -Line).Lines
-}
-
-Write-Host "== [1] split of the giant implementation files =="
-
-# 1a. every expected file of the split exists and is a sibling under the component's Src/
-$split = @(
-    "Components/PlotView/Src/PlotView.cpp",
-    "Components/PlotView/Src/PlotViewPaint.cpp",
-    "Components/PlotView/Src/PlotViewInteraction.cpp",
-    "Components/PlotView/Src/PlotViewFeatures.cpp",
-    "Components/PlotView/Src/PlotViewInternal.hpp",
-    "Components/SignalPanel/Src/SignalPanel.cpp",
-    "Components/SignalPanel/Src/SignalPanelPaint.cpp",
-    "Components/SignalPanel/Src/SignalPanelInteraction.cpp",
-    "Components/SignalPanel/Src/SignalPanelInternal.hpp",
-    "Components/Application/Src/Application.cpp",
-    "Components/Application/Src/ApplicationCommands.cpp",
-    "Components/Application/Src/ApplicationLoading.cpp",
-    "Components/Application/Src/ApplicationInternal.hpp",
-    "Utilities/Src/DataModel.cpp",
-    "Utilities/Src/DataModelTab.cpp",
-    "Utilities/Src/DataModelInternal.hpp"
-)
-foreach ($f in $split) {
-    $n = Lines $f
-    Check ($n -gt 0) ("exists + non-empty: " + $f + " (" + $n + " lines)")
-}
-
-# 1b. the core file of each split is a small fraction of the original monster file
-Check ((Lines "Components/PlotView/Src/PlotView.cpp") -lt 900) "PlotView.cpp shrunk to < 900 lines (was 13 695)"
-Check ((Lines "Components/PlotView/Src/PlotViewPaint.cpp") -gt 4000) "PlotViewPaint.cpp carries the rendering (> 4000 lines)"
-Check ((Lines "Components/SignalPanel/Src/SignalPanel.cpp") -lt 1200) "SignalPanel.cpp shrunk to < 1200 lines (was 4 184)"
-Check ((Lines "Components/Application/Src/Application.cpp") -lt 1500) "Application.cpp shrunk to < 1500 lines (was 3 135)"
-Check ((Lines "Utilities/Src/DataModel.cpp") -lt 1600) "DataModel.cpp shrunk to < 1600 lines (was 2 615)"
-
-# 1c. responsibility really moved: each concern is defined in exactly one file
-$concerns = @(
-    @{ symbol = "PlotView::Paint";            file = "PlotViewPaint.cpp" },
-    @{ symbol = "PlotView::PaintLane";        file = "PlotViewPaint.cpp" },
-    @{ symbol = "PlotView::PaintHint";        file = "PlotViewPaint.cpp" },
-    @{ symbol = "PlotView::LaneAtY";          file = "PlotViewInteraction.cpp" },
-    @{ symbol = "PlotView::CancelDrag";       file = "PlotViewInteraction.cpp" },
-    @{ symbol = "PlotView::FitAll";           file = "PlotViewFeatures.cpp" },
-    @{ symbol = "PlotView::SetHint";          file = "PlotViewFeatures.cpp" },
-    @{ symbol = "PlotView::Layout";           file = "PlotView.cpp" },
-    @{ symbol = "PlotView::BuildLaneVisuals"; file = "PlotView.cpp" },
-    @{ symbol = "SignalPanel::Paint";         file = "SignalPanelPaint.cpp" },
-    @{ symbol = "SignalPanel::OnLButtonDown"; file = "SignalPanelInteraction.cpp" },
-    @{ symbol = "SignalPanel::EnsureRows";    file = "SignalPanel.cpp" }
-)
-foreach ($c in $concerns) {
-    $hits = @(Select-String -Path "Components/*/Src/*.cpp", "Utilities/Src/*.cpp" -Pattern ("^\s*\w[\w:<>, ]* " + [regex]::Escape($c.symbol) + "\(") |
-              ForEach-Object { Split-Path $_.Path -Leaf })
-    $ok = ($hits.Count -eq 1) -and ($hits[0] -eq $c.file)
-    Check $ok ($c.symbol + " defined only in " + $c.file + " (found: " + ($hits -join ",") + ")")
-}
-
-# 1d. the constant/tool block of each big file became a named internal header + using-declaration
-$internal = @(
-    @{ file = "Components/PlotView/Src/PlotViewInternal.hpp";       ns = "pvdetail" },
-    @{ file = "Components/SignalPanel/Src/SignalPanelInternal.hpp"; ns = "spdetail" },
-    @{ file = "Components/Application/Src/ApplicationInternal.hpp"; ns = "appdetail" },
-    @{ file = "Utilities/Src/DataModelInternal.hpp";                ns = "dmdetail" }
-)
-foreach ($i in $internal) {
-    $text = Get-Content $i.file -Raw
-    $hasNs = $text -match ("namespace\s+" + $i.ns)
-    $hasUsing = $text -match ("using namespace\s+" + $i.ns + "\s*;")
-    $inlineCount = ([regex]::Matches($text, "(?m)^\s*(?:\[\[[^\]]*\]\]\s*)?inline\s")).Count
-    Check $hasNs ($i.file + " declares namespace " + $i.ns)
-    Check $hasUsing ($i.file + " injects it via the using-declaration for " + $i.ns)
-    Check ($inlineCount -ge 4) ($i.file + " marks the shared helpers inline (" + $inlineCount + " definitions)")
-}
-
-# 1e. the split files are compiled, and their objects hold the moved code
-$objs = @("PlotView.o","PlotViewPaint.o","PlotViewInteraction.o","PlotViewFeatures.o",
-          "SignalPanel.o","SignalPanelPaint.o","SignalPanelInteraction.o",
-          "Application.o","ApplicationCommands.o","ApplicationLoading.o",
-          "DataModel.o","DataModelTab.o")
-$missing = @()
-foreach ($o in $objs) { if (-not (Test-Path ("Build/Release/" + $o))) { $missing += $o } }
-Check ($missing.Count -eq 0) ("all split translation units were compiled (missing: " + ($missing -join ",") + ")")
-
-$nm = Get-Command nm -ErrorAction SilentlyContinue
-if ($nm -ne $null) {
-    $paintInPaint = @(nm --defined-only -C "Build/Release/PlotViewPaint.o" 2>$null | Select-String "jdi::PlotView::Paint")
-    $paintInCore  = @(nm --defined-only -C "Build/Release/PlotView.o" 2>$null | Select-String "jdi::PlotView::Paint")
-    Check ($paintInPaint.Count -gt 0) "nm: paint symbols live in PlotViewPaint.o"
-    Check ($paintInCore.Count -eq 0) "nm: no paint symbol left in PlotView.o"
-} else {
-    Check $false "nm not available (cannot verify symbol placement)"
-}
-
-# 1f. every implementation file of every component is registered in the Makefile
-$srcFiles = @(Get-ChildItem "Components/*/Src/*.cpp", "Utilities/Src/*.cpp" | ForEach-Object {
-    $_.FullName.Substring($root.Length + 1).Replace("\", "/")
-})
-$makefile = Get-Content "Makefile" -Raw
-$unregistered = @()
-foreach ($s in $srcFiles) {
-    $dir = $s.Substring(0, $s.LastIndexOf("/"))
-    if ($makefile -notmatch [regex]::Escape($dir)) { $unregistered += $s }
-}
-Check ($unregistered.Count -eq 0) ("every implementation directory is registered in the Makefile (missing: " + ($unregistered -join ",") + ")")
-Check ($srcFiles.Count -ge 24) ("implementation files in the tree: " + $srcFiles.Count)
-
-Write-Host ""
-Write-Host "== [2] Components/Shared =="
-
-Check (Test-Path "Components/Shared/Inc/UiControls.hpp") "Components/Shared/Inc/UiControls.hpp exists"
-Check (Test-Path "Components/Shared/Src/UiControls.cpp") "Components/Shared/Src/UiControls.cpp exists"
-Check ((Lines "Components/Shared/Inc/UiControls.hpp") -gt 100) ("UiControls.hpp declares the control API (" + (Lines "Components/Shared/Inc/UiControls.hpp") + " lines)")
-
-# 2a. the shared header really owns the enumerated control families
-$families = @("UiDrawPlusIcon","UiDrawCrossIcon","UiDrawTriangleIcon","UiDrawCheckBox",
-              "UiDrawSlider","UiDrawEditField","UiEditFieldMouseDown","UiDrawSwatch",
-              "UiSwatchNeedsOutline","UiContrastInk","UiSliderRatioFromX")
-$header = Get-Content "Components/Shared/Inc/UiControls.hpp" -Raw
-$missingFamilies = @()
-foreach ($f in $families) { if ($header -notmatch ("\b" + $f + "\b")) { $missingFamilies += $f } }
-Check ($missingFamilies.Count -eq 0) ("shared header exposes all control families (missing: " + ($missingFamilies -join ",") + ")")
-
-# 2b. symbol-level proof: every declared control is DEFINED by UiControls.o and by no other object.
-#     (Text matching cannot tell a definition from a call, so ask the linker's view instead.)
-$declared = @([regex]::Matches($header, "(?m)^\s*[\w:<>, ]+\s+(Ui\w+)\s*\(") | ForEach-Object { $_.Groups[1].Value } | Sort-Object -Unique)
-Check ($declared.Count -ge 15) ("UiControls.hpp declares " + $declared.Count + " control functions")
-
-$definitionOwner = @{}
-$objectFiles = @(Get-ChildItem "Build/Release/*.o" -ErrorAction SilentlyContinue)
-if ($nm -eq $null) {
-    Check $false "nm not available (cannot verify control definitions)"
-} else {
-    foreach ($o in $objectFiles) {
-        $syms = nm --defined-only -C $o.FullName 2>$null
-        foreach ($name in $declared) {
-            if ($syms | Select-String (" T jdi::" + [regex]::Escape($name) + "\(")) {
-                $definitionOwner[$name] = $o.Name
-            }
-        }
-    }
-    $wrongOwner = @($declared | Where-Object { -not $definitionOwner.ContainsKey($_) -or $definitionOwner[$_] -ne "UiControls.o" })
-    Check ($wrongOwner.Count -eq 0) ("nm: all " + $declared.Count + " declared controls are defined in UiControls.o (wrong/undefined: " + ($wrongOwner -join ",") + ")")
-    $uiControlsSymbols = @(nm --defined-only -C "Build/Release/UiControls.o" 2>$null | Select-String " T jdi::Ui").Count
-    Check ($uiControlsSymbols -ge 15) ("nm: UiControls.o defines " + $uiControlsSymbols + " Ui* symbols")
-}
-
-# 2c. other components actually consume them (>= 3 components, >= 30 call sites)
-$consumers = @(Select-String -Path "Components/*/Src/*.cpp", "Components/*/Inc/*.hpp" -Pattern "UiDrawPlusIcon|UiDrawCrossIcon|UiDrawTriangleIcon|UiDrawCheckBox|UiDrawSlider|UiDrawEditField|UiEditFieldMouseDown|UiEditFieldMouseMove|UiDrawSwatch|UiSwatchNeedsOutline|UiContrastInk|UiSliderRatioFromX|UiEditTextLeft|UiEditOffsetAt" |
-               Where-Object { (Split-Path $_.Path -Leaf) -ne "UiControls.hpp" } |
-               Group-Object { ($_.Path.Substring($root.Length + 1) -split "[\\/]")[1] })
-$componentNames = @($consumers | ForEach-Object { $_.Name })
-$totalCalls = 0
-foreach ($g in $consumers) { $totalCalls += $g.Count }
-Check ($componentNames.Count -ge 3) ("shared controls consumed by >= 3 components (" + ($componentNames -join ",") + ")")
-Check ($totalCalls -ge 30) ("shared control call sites across components: " + $totalCalls)
-
-# 2d. layering, stated exactly as the code obeys it:
-#      Components/Shared -> Utilities only (it must not include any component header)
-#      Utilities/PaintUtil = base layer (must not include UiControls.hpp)
-#      Utilities must not include feature components (PlotView / SignalPanel / Toolbar / TabBar)
-#      NOTE: Utilities/Src/PopupMenu.cpp and Utilities/Src/ColorPickerPopup.cpp are hand-drawn UI
-#      widgets that live in the Utilities folder historically; they consume the shared controls
-#      (same direction as the components do) and are deliberately excluded from the ban below.
-$sharedIncludes = @(Select-String -Path "Components/Shared/Inc/*.hpp", "Components/Shared/Src/*.cpp" -Pattern '^#include "' |
-                    Where-Object { $_.Line -match '"(Application|PlotView|SignalPanel|Toolbar|TabBar|PopupMenu|ColorPickerPopup)\.hpp"' })
-Check ($sharedIncludes.Count -eq 0) "Components/Shared depends on Utilities only (no component header)"
-$paintUtilIncludes = @(Select-String -Path "Utilities/Inc/PaintUtil.hpp", "Utilities/Src/PaintUtil.cpp" -Pattern '#include "UiControls.hpp"' -ErrorAction SilentlyContinue)
-Check ($paintUtilIncludes.Count -eq 0) "Utilities/PaintUtil (base layer) does not depend on Components/Shared"
-$badDir = @(Select-String -Path "Utilities/Src/*.cpp", "Utilities/Inc/*.hpp" -Pattern '#include "(PlotView|SignalPanel|Toolbar|TabBar)' -ErrorAction SilentlyContinue)
-Check ($badDir.Count -eq 0) "Utilities never includes a feature component"
-
-Write-Host ""
-Write-Host "== [3] user-requested behaviour invariants (source level) =="
-
-$utf8 = New-Object System.Text.UTF8Encoding($false)
-$panelFile    = "Components/SignalPanel/Src/SignalPanel.cpp"
-$panelIntFile = "Components/SignalPanel/Src/SignalPanelInteraction.cpp"
-$modelFile    = "Utilities/Inc/DataModel.hpp"
-
-$panelText    = [System.IO.File]::ReadAllText($panelFile, $utf8)
-$panelIntText = [System.IO.File]::ReadAllText($panelIntFile, $utf8)
-$modelText    = [System.IO.File]::ReadAllText($modelFile, $utf8)
-
-# 3a. collapsing a group needs the disclosure triangle OR the "Group N" label -- clicking the name
-#     itself must not collapse it.  (User 2026-10-16.)
-Check ($panelText -match "return RowPart::GROUP_TITLE;") "hit test yields a dedicated GROUP_TITLE part"
-Check ($panelText -match "const gd::RectF labelRect\(labelLeft, rect\.Y, GroupLabelWidth\(row\), rect\.Height\);") "GROUP_TITLE hot zone is exactly the Group-N label rect"
-$gate = @(Select-String -Path $panelIntFile -Pattern "^\s*if \(part != RowPart::DISCLOSURE && part != RowPart::GROUP_TITLE\)")
-Check ($gate.Count -eq 1) ("single-click toggle gate accepts only DISCLOSURE / GROUP_TITLE (found " + $gate.Count + ")")
-$toggles = @(Select-String -Path $panelIntFile -Pattern "^\s*ToggleGroupFromRow\(item\.groupIndex, row\);")
-Check ($toggles.Count -eq 2) ("ToggleGroupFromRow has exactly 2 entry points, single click + double click (found " + $toggles.Count + ")")
-Check ($panelIntText -match "(?s)if \(part == RowPart::DISCLOSURE\)\s*\{\s*//[^\n]*\n(\s*//[^\n]*\n)*\s*ToggleGroupFromRow") "double click on the triangle still collapses"
-Check ($panelIntText -match "(?s)if \(part != RowPart::BODY\)\s*\{\s*return false;\s*\}") "double click outside the name body never starts a rename"
-
-# 3b. the group rename box must stop before the "N items" counter.  (User 2026-10-16.)
-Check ($panelText -match "right = statsRight - statsWidth - 6\.0f \* m_scale;") "rename box right edge excludes the item counter"
-Check ($panelText -notmatch "right = statsRight;") "rename box never extends over the counter"
-Check ($panelText -match "const float statsWidth = UiMeasureTextWidth\(m_fonts->uiSmall, GroupStatsText\(row\)\);") "counter width comes from GroupStatsText"
-
-# 3c. SignalData / SignalGroup keep exactly ONE name field.  (User 2026-10-16: drop displayName.)
-$data = [regex]::Match($modelText, "(?s)struct SignalData\s*\{(.*?)\n\t\};")
-Check ($data.Success) "SignalData struct found in the data model"
-if ($data.Success) {
-    $body = $data.Groups[1].Value
-    $fields = @([regex]::Matches($body, "std::wstring\s+\w+;"))
-    Check ($fields.Count -eq 1) ("SignalData declares exactly one string field (found " + $fields.Count + ")")
-    Check ($body -match "std::wstring name;") "that single field is name"
-}
-$group = [regex]::Match($modelText, "(?s)struct SignalGroup\s*\{(.*?)\n\t\};")
-Check ($group.Success) "SignalGroup struct found in the data model"
-if ($group.Success) {
-    $gbody = $group.Groups[1].Value
-    $gfields = @([regex]::Matches($gbody, "std::wstring\s+\w+;"))
-    Check ($gfields.Count -eq 1) ("SignalGroup declares exactly one string field (found " + $gfields.Count + ")")
-}
-Check ($modelText -match "bool RenameSignal\(") "DataSet::RenameSignal replaces the old SetSignalDisplayName"
-Check ($modelText -match "bool RenameGroup\(") "DataSet::RenameGroup replaces the old SetGroupDisplayName"
-$staleNames = @(Select-String -Path "Components/*/Src/*.cpp","Components/*/Inc/*.hpp","Components/*/Src/*.hpp",
-                "Utilities/Src/*.cpp","Utilities/Inc/*.hpp" -Pattern "displayName|SetSignalDisplayName|SetGroupDisplayName|\.Title\(\)|->Title\(\)")
-Check ($staleNames.Count -eq 0) ("no displayName / Title() left in any source (found " + $staleNames.Count + ")")
-
-# 3d. comment hygiene, driven by a UTF-8 data file (the .ps1 itself must stay ASCII for PowerShell 5.1)
-$phraseFile = "Tools/structcheck_phrases.txt"
-Check (Test-Path $phraseFile) "comment-hygiene phrase list exists"
-if (Test-Path $phraseFile) {
-    $scanFiles = @(Get-ChildItem "Components/*/Src/*.cpp","Components/*/Src/*.hpp","Components/*/Inc/*.hpp",
-                   "Utilities/Src/*.cpp","Utilities/Inc/*.hpp" | ForEach-Object { $_.FullName })
-    $scanText = @{}
-    foreach ($f in $scanFiles) { $scanText[$f] = [System.IO.File]::ReadAllText($f, $utf8) }
-    foreach ($line in [System.IO.File]::ReadAllLines($phraseFile, $utf8)) {
-        if ([string]::IsNullOrWhiteSpace($line)) { continue }
-        $parts = $line -split "`t"
-        $mode = $parts[0]
-        if ($mode -eq "forbid") {
-            $phrase = $parts[1]
-            $offenders = @($scanFiles | Where-Object { $scanText[$_].Contains($phrase) })
-            Check ($offenders.Count -eq 0) ("stale wording absent everywhere: " + $phrase + " (found in " + $offenders.Count + " files)")
-        } elseif ($mode -eq "require") {
-            $target = $parts[1]
-            $phrase = $parts[2]
-            Check ((Test-Path $target) -and ([System.IO.File]::ReadAllText($target, $utf8).Contains($phrase))) ("corrected comment present in " + $target + ": " + $phrase)
-        }
-    }
-}
-
-Write-Host ""
-Write-Host ("structcheck: " + $pass + " passed, " + $fail + " failed")
-if ($fail -ne 0) { exit 1 }
-exit 0

Tools/structcheck_phrases.txt

@@ -1,13 +0,0 @@
-forbid	文件下标
-forbid	所属文件下标
-forbid	原信号所属文件下标
-forbid	文件分组
-forbid	原文件下标
-forbid	文件序号
-forbid	displayName
-forbid	SetSignalDisplayName
-forbid	SetGroupDisplayName
-require	Components/Application/Inc/Application.hpp	原信号所属分组下标
-require	Utilities/Inc/DataModel.hpp	信号名称（加载时取列名 / 通道名；用户可在界面上重命名）
-require	Utilities/Inc/DataModel.hpp	分组名（加载时取源文件名、含扩展名；用户可重命名）
-require	Utilities/Inc/DataModel.hpp	与磁盘上的文件**没有任何关系**